Bc2000 (for the BCF2000 & BCR2000)

Well i can't totally answer your question but i know from using my Midi keyboard that when i changed instruments by pressing the "Next" instrument button the BCR2000 would also change to the next preset which was frustrating. SO i Basically changed the channel of my keybopard cause i knew it had to do with  communicating on the same channel.

So what i did was change the "Keyboard Channel" through my keyboard. It was set on Channel one originally. The BCR2000 is set on one also. I switched the Keyboard Channel to 4 and the BCR2000 stopped flipping preset everytime i changed keyboard preset's. I'm pretty sure that you can stop both BCR's from changing presets by changing the Global channel value basically. But i'm not 100% certain on this. Hopefully someone else can elaborate more or correct me if i'm wrong. 

Basically you would Enter "Global Mode" by Pressing both the store and Edit Buttons at the same time. Then Adjust the Channel value of the second BCR2000 by using the "CH" Encoder which is Encoder number two. Basically the top row of encoders but the second one in. ALso you'll need to set up your software to communicate with the channel you set it to. But your software might already be configured to all channels like it is with FL Studio for me. I would put the second BCR on channel two. 

I use FL Studio and I know That FL Studio is still able to receive data from the BCR no matter what channel i put it on, Even in the middle of  a project. You can change the Channel on your current BCR to something other than one and see if your software still responds and there's your answer.

Hope i helped...
If i confused you i can explain further.

Chris Oborski




--- In bc2000@yahoogroups.com, "symbiontsound" <symbiontsound@...> wrote:
>
> Hello all,
> 
> I'm considering buying another BCR2000 to cascade with my current unit and I was wondering, since I've never had the opportunity to use two of them together before, if I switch a preset on the first (master) unit, will the preset automatically change on the second (slave) unit?  Or do I have to switch them seperately?
> 
> Thanks in advance,
> 
> John
>