Bc2000 (for the BCF2000 & BCR2000)

Hi,
Thanks for your reply.
Come to think of it, I dont' even know if my unit needs updating as i bought it new, so my question might have been a bit premature.
I don't have it here at work, but i'll check the firmware version when i get home. 

br, 
Tode

--- In bc2000@yahoogroups.com, "Mark" <markwinvdb@...> wrote:
>
> --- In bc2000@yahoogroups.com, "tode9" <skitopiss@> wrote:
> > Does updating the firmware erase any user made presets?
> 
> No. The firmware and the presets are in separate areas of the BCR's memory, so flashing the firmware does not affect the presets in any way.
> 
> However...:
> 
> > I installed the Mopho presets (thanks for those!) i found here, and then realised that maybe i should have updated the firmware first.
> 
> In theory presets made for the latest firmware (1.10) could contain a few features which older firmware doesn't support.
> So your presets may have become slightly "impoverished" when you installed them.
> So in this respect it might indeed be safest to install the presets again after upgrading the firmware.
> 
> What version was your original firmware?
> If it was any version other than 1.07, you could do me a big favor by saving the old version and sending it to me: this would help me improve the firmware utility in BC Manager.
> (I'll explain how to do this if you indeed have a different version, and haven't upgraded to 1.10 already, of course....)
> 
> Best wishes,
> Mark van den Berg.
>