Bc2000 (for the BCF2000 & BCR2000)

Yeah, turns out it already has the 1.10 firmware, so my apologies for the unnecessary question.
br,
T

--- In bc2000@yahoogroups.com, "tode9" <skitopiss@...> wrote:
>
> Hi,
> Thanks for your reply.
> Come to think of it, I dont' even know if my unit needs updating as i bought it new, so my question might have been a bit premature.
> I don't have it here at work, but i'll check the firmware version when i get home. 
> 
> br, 
> Tode
> 
> --- In bc2000@yahoogroups.com, "Mark" <markwinvdb@> wrote:
> >
> > --- In bc2000@yahoogroups.com, "tode9" <skitopiss@> wrote:
> > > Does updating the firmware erase any user made presets?
> > 
> > No. The firmware and the presets are in separate areas of the BCR's memory, so flashing the firmware does not affect the presets in any way.
> > 
> > However...:
> > 
> > > I installed the Mopho presets (thanks for those!) i found here, and then realised that maybe i should have updated the firmware first.
> > 
> > In theory presets made for the latest firmware (1.10) could contain a few features which older firmware doesn't support.
> > So your presets may have become slightly "impoverished" when you installed them.
> > So in this respect it might indeed be safest to install the presets again after upgrading the firmware.
> > 
> > What version was your original firmware?
> > If it was any version other than 1.07, you could do me a big favor by saving the old version and sending it to me: this would help me improve the firmware utility in BC Manager.
> > (I'll explain how to do this if you indeed have a different version, and haven't upgraded to 1.10 already, of course....)
> > 
> > Best wishes,
> > Mark van den Berg.
> >
>