Bc2000 (for the BCF2000 & BCR2000)

2011/1/10 Croppa H. Chicken <rorro_dnd@...>:
> El 10/01/2011, a las 20:55, Bruno <brunorc@...> escribió:
>
>> Can you be more explicit about the synths you want to control that way?
>>
>> Regards,
>> Bruno
>
> A Korg Triton Rack
> A Roland XV-5050
> A Roland XP-30
> An Emu P2K*
> A Korg NS5R*

They all look modern enough to support turning on/off MIDI per
specific channel@interface. That's definitely the case of P2K (the
only one I own from this list), but not sure if I would be able to try
it out thru BCR2K before the weekend - currently I'm refurbishing my
"studio", so everything is disconnected and stuffed in one corner.

You may want to try sending this SysEx from BCR2K (or better from MIDI
Ox or a similar software, for the beginning) to your P2K:

F0 18 0F xx 55 01 04 01 01 yy 00 07 01 00 00 F7, where
 - xx is your P2K's SysEx ID in hex, starting from 0
 - yy is the MIDI channel (e.g. 00 represents channel 1 at the interface A)

It should turn off "MIDI enable" for the specified channel. Definitely
shouldn't blow your module out, nor erase its sounds, but backup first
(standard disclaimer follows).

HTH,
Bruno