Bc2000 (for the BCF2000 & BCR2000)

I had got this SPC message (in BCR2000 display) before.
What I found is this invariably related to me using the "Update changed" from the BCManager.

If I changed to sending the full sysex, all the presets would load as expected. By "full" I think I mean the mode that sends a plethora of the .tx strings for each preset rather than the just the deltas.

That is from the BCManager there are multiple ways to transfer the presets from host. You may like to try each of them to see if any work for you.

The BCManager software works well under Wine (on linux). And others say it works well under Mac for them.

What happens if you load the syx dump into the BCManager software?
Does the mapping (look at the layout GUI then examine any special mappings if necessary -- particularly the encoders/buttons that you are having trouble with).
Do they look kosher?
Are they corrupt in some way?

What if you then use Mark's midi-sniffer tool to see what BCManager sends to the BCR ... again any odd looking transfer that might point to trouble?

Regards

Steve H

PS I have a K1r ... any idea if the template _might_ work for K1r?
Or could be used as a basis for the K1r??

--- In bc2000@yahoogroups.com, "pvanadrichem" <pvanadrichem@...> wrote:
>
> Hello and sorry for not getting back sooner,
> 
> I'm primarilly interested in the K4r, k3m, dw6000 and jv880 presets but I also downloaded Massimo's Evolver preset. The K4r, DW6000 and Evolver presets did seem to upload (lights flashing on the BCR). I must correct myself with what I said earlier: there does seem to be something incoming in Cubase when i tweek a BRC knob. However, no change in the sound. Also, when I'm checking the settings of the preset, each upper left function knob only mentions 'SPC' as midi message sort (not mentioned anywhere in the BCR manual!)
> 
> Answering Mark's question: I guess Massimo's Evolver preset is mostly CC, so the answer is yes, both with sysex AND CC messages.
> 
> Any ideas what might be wrong?
> 
> Best regards,
> 
> Pieter
> --- In bc2000@yahoogroups.com, "Mark v.d. Berg" <markwinvdb@> wrote:
> >
> > --- In bc2000@yahoogroups.com, "pvanadrichem" <pvanadrichem@> wrote:
> > > I've made a couple of cc-based presets. My ambition is to load a couple of sysex based presets in the BCR. Unfortunately I've been unable to load the presets. The BCR does seem to 'load' them but there is no reaction from any of the synths when I tweek any of the knobs. Cubase Studio is also not noticing any incoming midi data. I've got the BCR on USB mode 1.
> > > 
> > > Any idaes what I might be doing wrong?
> > 
> > Does the problem occur with ALL your presets (CC-based AND sysex-based), or just the sysex-based ones?
> >
>