Bc2000 (for the BCF2000 & BCR2000)

Thanks so much, I forgot about the USB modes U1-4.. I set it back to a MIDI mode and everything is working again. I don't know how I put it in that mode though, maybe BC Manager did that somehow?

Now I only have to piece it back together :)

Thanks again, was already bidding for a new one to replace it.

--- In bc2000@yahoogroups.com, "Mark v.d. Berg" <markwinvdb@...> wrote:
>
> --- In bc2000@yahoogroups.com, "zeitgeber24" <rbeenen@> wrote:
> > Thanks man, I want to try that, but I can't send any MIDI to it.
> 
> Don't waste your time reflashing the firmware: if the BCF's display shows "1.10" during startup, the firmware is guaranteed to be 100% OK, because the BCF's bootloader performs a checksum on the firmware before starting it.
> 
> One thing that does matter: is the BCF in "B-Control" mode or in an emulation mode?
> 
> And in which operating mode (U-1..4, S-1..4) is the BCF?
> 
> For various tricks during startup and afterwards, see sections 22 and 23 of "BC MIDI Implementation.pdf", available from http://home.kpn.nl/f2hmjvandenberg281/bc2000.html .
> 
> Hope this helps,
> Mark.
>