Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, "peterobrian@..." <peterobrian@...> wrote:
> yes, it seems that the enconders work in the right way, i.e. the first encoder in the upper row has a value of 0 to 3, the second 0 to 3, the fourth 0 to 5 the fifth 0-127.... and when i move them i can see the leds and the value change in the bcr display, definitely it seems that is working ok but the mks doesnt do anything... (i.e. the first encoder is the dco range so i should hear a change in the sound)

OK, then it's probably a totally different problem.

Maybe you can verify that the BCR actually sends the intended MIDI messages:
E.g. in BC Manager, from the main window, open the "MIDI input messages" window (3rd icon on the toolbar); press "Record" there and start moving encoders.
If the expected messages appear in the window, the problem is definitely not with the BCR's setup (in particular the preset), but with the connection to the MKS or the setup of the MKS itself (maybe the wrong MIDI channel?).

Mark.