Bc2000 (for the BCF2000 & BCR2000)

----- Original Message -----

From:

bc2000@yahoogroups.com

To:

Cc:

Sent:

Tue, 14 Feb 2012 17:38:05 -0000

Subject:

[bc2000] Re: newbie

Hello Mark, thanks for the quick reply

yes, it seems that the enconders work in the right way, i.e. the first encoder in the upper row has a value of 0 to 3, the second 0 to 3, the fourth 0 to 5 the fifth 0-127.... and when i move them i can see the leds and the value change in the bcr display, definitely it seems that is working ok but the mks doesnt do anything... (i.e. the first encoder is the dco range so i should hear a change in the sound)

Regards,
J

--- In bc2000@yahoogroups.com, "Mark v.d. Berg" wrote:
>
> --- In bc2000@yahoogroupscom, "peterobrian@" <peterobrian@> wrote:
> > then go to presets and import my mks50 sysex file, OK, i can see the preset, then i go to midi/send and the bcr200 start to blick, it seems that the presets has loaded ok in the bcr hardware....
> > but now when i move encoders on the bcr the mks doesnt do anything.... if anyone could tell me what im missing or if im doing something wrong... thanks in advance...im getting a bit mad :)
>
> When you move the encoders, do these encoders (and the BCR's display) respond as intended?
> You should realize that when moving the encoders you're always working with the BCR's "temporary" preset (a.k.a. "preset 0").
> See questions 43-45 (pp. 94-95) in the FAQ section of BC Manager Manual.
>
> Hope this helps,
> Mark.
>