Bc2000 (for the BCF2000 & BCR2000)

--- In bc2000@yahoogroups.com, Uwe Jülich <uwejuelich@...> wrote:
> i get the two errors when trying to connect with reason. bc manager will
> also not recognize the bcr. is there any chance to find out what those error
> messages mean?

See section 21.2 in "BC MIDI Implementation.pdf", available from http://home.kpn.nl/f2hmjvandenberg281/bc2000.html .

Error numbers 6 and 22 indicate problems with the BCL sequences:
In any BCL message sequence, each message has an internal index, and the BCF2000 and BCR2000 require these indexes to increment correctly (starting from 0).
So for instance if there is a split followed by a merge in the signal path, a (correct) sequence with indexes 0, 1, 2 ... would be received as 0, 0, 1, 1, 2, 2 - which the receiving BCF/BCR won't accept.

In any case there seems to be something fundamentally wrong about your connection setup.
Is your BCR in the correct Operating Mode (S/U-1/2/3/4)?

Hope this helps,
Mark.