Bc2000 (for the BCF2000 & BCR2000)

1. If the parameter you are changing is within the patch it will go into edit mode when you change the value from the BCR. If it was
 say , something like pitch bend or modulation (joy stick or wheels) pedal etc., it would stay in normal operation.  the same thing happens with most editors.
2. A displayed range isn't necessarily the control change value and I think it was mentioned earlier that the midi implementation sheet in the back of the manual of your JX-8P should show the actual values. one easy way to tell is if the paramter maxes out way before the encoder turns full value or the oppisite showing the encoder is programmed incorrectly.

--- In bc2000 @yahoogroups.com, "aaron.schepler" <aaron3900@...> wrote:
>
> Hello all,
> 
> I'm new to the group.  I've downloaded and just started enjoying the JX-8P preset, which I've installed on my new BCR2000.  I have a couple of questions:he 
> 
> 1) When I turn the encoders on the BCR, is the display on the JX-8P supposed to cha nge and show the parameter that I'm editing (and the corresponding values)?  It doesn't do that now.  The number next to the name of the selected patch flashes, showing that it's being edited, but that's all.
> 
> 2) On the BCR itself, the digital display always shows a range of 0-127 when I turn the encoders, even if the range on the JX-8P is different (e.g., 0-3 for at least one parameter).  Is this normal?
> 
> Thanks in advance; I really appreciate the fine work that's been done to create these presets!
> 
> Aaron
>