Bc2000 (for the BCF2000 & BCR2000)

Rainer,

Thank you for the helpful response.  I now realize that I need to be in "parameter" mode in order to see the changes on the synth.  The other question I had doesn't concern me that much.  It was just something that I was curious about.  

Again, thanks for your hard work on the template.  All of us JX-8P owners are benefiting from it! :-)

Aaron

--- In bc2000@yahoogroups.com, Rainer Keizer <rainer.keizer@...> wrote:
>
> Hi Aaron!
> 
> Thanks for the compliments on the template!
> 
> To answer your questions:
> 1) When you press "PARAMETER" on your 8P, it WILL jump to the parameter and
> show the value it currently has, updating live when you turn a control.
> 2) That is correct, the thing is that I actually didn't know what hex value
> triggered which param state, so I just let the control send the full range.
> There is no 1 to 1 correllation between the value sent and the actual
> parameter value on the 8P. For example, some parameters stay "0" on the 8P
> from values 0-31, and once 32 is sent the value jumps to "1". I don't even
> know whether the BCR is capable of only sending 0, 32, 64 and so on - so
> you either have to accept it or try to improve it :-)
> 
> Cheers,
> Rainer
> 
> BTW: if you have an iPad, you could also use it to control your synths
> using an incredibly useful (payed) app called Midi Designer. I created free
> layouts for this app for the JX-3P, JX-8P, Alpha Juno 1/2, MKS-30, MKS-50,
> MKS-70:
> http://mididesigner.com/qa/171/roland-jx-3p-jx-8p-mks-30-mks-50
> (some of these synths obviously need an upgrade kit before they can be
> programmed by any editor)
> 
> -- 
> My music: http://www.soundcloud.com/planeshifter
>