Message
Re: Major issues with new BCF2000 - lots of lag and a broken button
2013-02-20 by Royce
The encoders can have 4 different resolutions depending on what speed you are turning them and you can program this value.
Check out my BC guide in the files area - SecretBC.pdf
http://f1.grp.yahoofs.com/v1/PHskUZIMDc3g0_s6h1lddgdYgz7k32zhQ1JB32BGbgIlKt6SqffbH0_1EDZqWnO4iFMk9Zc02RRxmE0kSO-EAg/Documentation/SecretBC.pdf
Get Mark's PC editor from his web site
http://home.kpn.nl/f2hmjvandenberg281/
Program an encoder with different .resolution values to see if that makes a difference.
All the best
Royce
--- In bc2000@yahoogroups.com, Joey Robinson wrote:
>
> Hi all,
>
> I bought a new BCF 2000 off eBay, (in new condition), and am in need of
> some serious help.
>
> The rotary knobs themselves have a fair bit of jumpiness or lag compared to
> the BCR I just hooked up. The BCR feels fantastic, with a nice resolution
> to the knobs. The BCF feels jumpy. I've tried everything I can think of and
> have researched on google. I've ran the unit in every emulation mode, I've
> tried straight midi mapping a knob to pan or a send, and also have tried
> using Learn. The Learn button on the BCF seems to not work for mapping most
> of the knobs.
>
> I am using Win7 x64 and have the latest x64 drivers from the Behringer site
> installed. I've tried with every manner of "Mackie" or "BCF" control
> surface mode in Ableton, as well as tried disabling/enabling the different
> MIDI track options below. I've tried switching USB cables between the BCF
> and BCR, nothing seems to make a difference. The knobs in general are much
> looser on the BCF2000 than the BCR. They have a much worse resolution and
> laggy feel than the BCR. I have no idea what else to try. Oh, and yes I'm
> using the latest 1.10 firmware.
>
> I am also having an issue where the "left preset" browse button only works
> half the time if in B-Control mode. The button is obviously dying, fresh
> out of box. Are these buttons fixable?
>
> Thanks immensely for any help.
>