Bc2000 (for the BCF2000 & BCR2000)

>
> Hi all,
> 
> I bought a new BCF 2000 off eBay, (in new condition), and am in need of
> some serious help.
> 
> The rotary knobs themselves have a fair bit of jumpiness or lag compared to
> the BCR I just hooked up. The BCR feels fantastic, with a nice resolution
> to the knobs. The BCF feels jumpy. I've tried everything I can think of and
> have researched on google. I've ran the unit in every emulation mode, I've
> tried straight midi mapping a knob to pan or a send, and also have tried
> using Learn. The Learn button on the BCF seems to not work for mapping most
> of the knobs.
> 
> I am using Win7 x64 and have the latest x64 drivers from the Behringer site
> installed. I've tried with every manner of "Mackie" or "BCF" control
> surface mode in Ableton, as well as tried disabling/enabling the different
> MIDI track options below. I've tried switching USB cables between the BCF
> and BCR, nothing seems to make a difference. The knobs in general are much
> looser on the BCF2000 than the BCR. They have a much worse resolution and
> laggy feel than the BCR. I have no idea what else to try. Oh, and yes I'm
> using the latest 1.10 firmware.
> 
> I am also having an issue where the "left preset" browse button only works
> half the time if in B-Control mode. The button is obviously dying, fresh
> out of box. Are these buttons fixable?
> 
> Thanks immensely for any help.
>

>
> Would I do this inside, or just from the outside? I'm not familiar with doing much of that type of thing but I can give it a shot. Is WD-40 similar?
> 
> I also tried connecting with MIDI to my audio interface which didnt seem to help the lag at all
> 
> --- In bc2000@yahoogroups.com, Joey Robinson <jsrobinson@> wrote:
> >
> > Hi all,
> > 
> > I bought a new BCF 2000 off eBay, (in new condition), and am in need of
> > some serious help.
> > 
> > The rotary knobs themselves have a fair bit of jumpiness or lag compared to
> > the BCR I just hooked up. The BCR feels fantastic, with a nice resolution
> > to the knobs. The BCF feels jumpy. I've tried everything I can think of and
> > have researched on google. I've ran the unit in every emulation mode, I've
> > tried straight midi mapping a knob to pan or a send, and also have tried
> > using Learn. The Learn button on the BCF seems to not work for mapping most
> > of the knobs.
> > 
> > I am using Win7 x64 and have the latest x64 drivers from the Behringer site
> > installed. I've tried with every manner of "Mackie" or "BCF" control
> > surface mode in Ableton, as well as tried disabling/enabling the different
> > MIDI track options below. I've tried switching USB cables between the BCF
> > and BCR, nothing seems to make a difference. The knobs in general are much
> > looser on the BCF2000 than the BCR. They have a much worse resolution and
> > laggy feel than the BCR. I have no idea what else to try. Oh, and yes I'm
> > using the latest 1.10 firmware.
> > 
> > I am also having an issue where the "left preset" browse button only works
> > half the time if in B-Control mode. The button is obviously dying, fresh
> > out of box. Are these buttons fixable?
> > 
> > Thanks immensely for any help.
> >
>

>
> I'd like to learn how to determine what my BCR resolution is set to, at
> that, so I can do a comparison.
> 
> On Wed, Feb 20, 2013 at 11:34 AM, Joey Robinson <jsrobinson@...>wrote:
> 
> > Hey Royce and all,
> >
> > Thanks for the tip. I've found BCManager but I must admit I'm really in
> > the dark on how to use this.
> >
> > Is there a preset guide for idiots around? I've read the BCEdit as well as
> > the BCManager manual and I'm no less confused yet.
> >
> > Could anyone outline how to do a very standard edit of one single knob so
> > I can get started? I've gotten as far as having BCManager detect my
> > hardware, but as far as actually editing one of the presets or creating my
> > own, I'm totally not sure what to do. Please be as detailed as possible,
> > I'm fairly technically savvy but this has me in the dark.
> >
> > Thanks!
> >
> >
> > On Wed, Feb 20, 2013 at 2:34 AM, Royce <rpcfender@...> wrote:
> >
> >> **
> >>
> >>
> >> Before you do anything with the physical encoder try changing the
> >> resolution by software.
> >> The encoders can have 4 different resolutions depending on what speed you
> >> are turning them and you can program this value.
> >>
> >> Check out my BC guide in the files area - SecretBC.pdf
> >>
> >> http://f1.grp.yahoofs.com/v1/PHskUZIMDc3g0_s6h1lddgdYgz7k32zhQ1JB32BGbgIlKt6SqffbH0_1EDZqWnO4iFMk9Zc02RRxmE0kSO-EAg/Documentation/SecretBC.pdf
> >>
> >> Get Mark's PC editor from his web site
> >> http://home.kpn.nl/f2hmjvandenberg281/
> >> <http://home.kpn.nl/f2hmjvandenberg281/>
> >>
> >> Program an encoder with different .resolution values to see if that makes
> >> a difference.
> >>
> >> All the best
> >> Royce
> >>
> >>
> >> --- In bc2000@yahoogroups.com, Joey Robinson <jsrobinson@> wrote:
> >> >
> >> > Hi all,
> >> >
> >> > I bought a new BCF 2000 off eBay, (in new condition), and am in need of
> >> > some serious help.
> >> >
> >> > The rotary knobs themselves have a fair bit of jumpiness or lag
> >> compared to
> >> > the BCR I just hooked up. The BCR feels fantastic, with a nice
> >> resolution
> >> > to the knobs. The BCF feels jumpy. I've tried everything I can think of
> >> and
> >> > have researched on google. I've ran the unit in every emulation mode,
> >> I've
> >> > tried straight midi mapping a knob to pan or a send, and also have tried
> >> > using Learn. The Learn button on the BCF seems to not work for mapping
> >> most
> >> > of the knobs.
> >> >
> >> > I am using Win7 x64 and have the latest x64 drivers from the Behringer
> >> site
> >> > installed. I've tried with every manner of "Mackie" or "BCF" control
> >> > surface mode in Ableton, as well as tried disabling/enabling the
> >> different
> >> > MIDI track options below. I've tried switching USB cables between the
> >> BCF
> >> > and BCR, nothing seems to make a difference. The knobs in general are
> >> much
> >> > looser on the BCF2000 than the BCR. They have a much worse resolution
> >> and
> >> > laggy feel than the BCR. I have no idea what else to try. Oh, and yes
> >> I'm
> >> > using the latest 1.10 firmware.
> >> >
> >> > I am also having an issue where the "left preset" browse button only
> >> works
> >> > half the time if in B-Control mode. The button is obviously dying, fresh
> >> > out of box. Are these buttons fixable?
> >> >
> >> > Thanks immensely for any help.
> >> >
> >>
> >>  
> >>
> >
> >
>

>
> Hi Joey
> I'm afraid that I mainly use my editor which is a bit tech and Mark's is much better for most people, but here goes
> 
> Start BC Manager
> Click the left button "Show List of B-controls"
> If your control isn't there then Menu "B-Control/New BCF2000"
> This row should be highlighted so click menu 'Midi options" and select the Midi In and Out for your BCF and the program should find it.
> 
> Click the P button and the preset list comes up
> On this new window press Menu "Midi / Receive" to download the preset list.
> Select a preset 0 and press the circle within a circle button "Encoders'.
> This will show you the details of the encoders
> 
> The encoders have a physical resolution of 96.
> This means that there are 96 different spots when you turn the 
> encoder 360 degrees.
> 
> The software parameter 'Resolutions' has a default 96 which means that each spot puts out a the next incremented value 1,2,3...
> 
> So if you had a range of 0 to 127 you would have to turn the encoder more than one whole turn to get to 127.
> 
> If you made the resolution  96 x 2 =192 then at each spot you would put out the old value + 2 eg ... 10,12,14...
> 
> If you made the resolution  96 / 2 =48 then at each spot you would put out the value twice before incrementing eg ... 10,10,11,11,12,12,...
> 
> Hope this helps
> Royce
> 
> 
> 
> --- In bc2000@yahoogroups.com, Joey Robinson <jsrobinson@> wrote:
> >
> > I'd like to learn how to determine what my BCR resolution is set to, at
> > that, so I can do a comparison.
> > 
> > On Wed, Feb 20, 2013 at 11:34 AM, Joey Robinson <jsrobinson@>wrote:
> > 
> > > Hey Royce and all,
> > >
> > > Thanks for the tip. I've found BCManager but I must admit I'm really in
> > > the dark on how to use this.
> > >
> > > Is there a preset guide for idiots around? I've read the BCEdit as well as
> > > the BCManager manual and I'm no less confused yet.
> > >
> > > Could anyone outline how to do a very standard edit of one single knob so
> > > I can get started? I've gotten as far as having BCManager detect my
> > > hardware, but as far as actually editing one of the presets or creating my
> > > own, I'm totally not sure what to do. Please be as detailed as possible,
> > > I'm fairly technically savvy but this has me in the dark.
> > >
> > > Thanks!
> > >
> > >
> > > On Wed, Feb 20, 2013 at 2:34 AM, Royce <rpcfender@> wrote:
> > >
> > >> **
> > >>
> > >>
> > >> Before you do anything with the physical encoder try changing the
> > >> resolution by software.
> > >> The encoders can have 4 different resolutions depending on what speed you
> > >> are turning them and you can program this value.
> > >>
> > >> Check out my BC guide in the files area - SecretBC.pdf
> > >>
> > >> http://f1.grp.yahoofs.com/v1/PHskUZIMDc3g0_s6h1lddgdYgz7k32zhQ1JB32BGbgIlKt6SqffbH0_1EDZqWnO4iFMk9Zc02RRxmE0kSO-EAg/Documentation/SecretBC.pdf
> > >>
> > >> Get Mark's PC editor from his web site
> > >> http://home.kpn.nl/f2hmjvandenberg281/
> > >> <http://home.kpn.nl/f2hmjvandenberg281/>
> > >>
> > >> Program an encoder with different .resolution values to see if that makes
> > >> a difference.
> > >>
> > >> All the best
> > >> Royce
> > >>
> > >>
> > >> --- In bc2000@yahoogroups.com, Joey Robinson <jsrobinson@> wrote:
> > >> >
> > >> > Hi all,
> > >> >
> > >> > I bought a new BCF 2000 off eBay, (in new condition), and am in need of
> > >> > some serious help.
> > >> >
> > >> > The rotary knobs themselves have a fair bit of jumpiness or lag
> > >> compared to
> > >> > the BCR I just hooked up. The BCR feels fantastic, with a nice
> > >> resolution
> > >> > to the knobs. The BCF feels jumpy. I've tried everything I can think of
> > >> and
> > >> > have researched on google. I've ran the unit in every emulation mode,
> > >> I've
> > >> > tried straight midi mapping a knob to pan or a send, and also have tried
> > >> > using Learn. The Learn button on the BCF seems to not work for mapping
> > >> most
> > >> > of the knobs.
> > >> >
> > >> > I am using Win7 x64 and have the latest x64 drivers from the Behringer
> > >> site
> > >> > installed. I've tried with every manner of "Mackie" or "BCF" control
> > >> > surface mode in Ableton, as well as tried disabling/enabling the
> > >> different
> > >> > MIDI track options below. I've tried switching USB cables between the
> > >> BCF
> > >> > and BCR, nothing seems to make a difference. The knobs in general are
> > >> much
> > >> > looser on the BCF2000 than the BCR. They have a much worse resolution
> > >> and
> > >> > laggy feel than the BCR. I have no idea what else to try. Oh, and yes
> > >> I'm
> > >> > using the latest 1.10 firmware.
> > >> >
> > >> > I am also having an issue where the "left preset" browse button only
> > >> works
> > >> > half the time if in B-Control mode. The button is obviously dying, fresh
> > >> > out of box. Are these buttons fixable?
> > >> >
> > >> > Thanks immensely for any help.
> > >> >
> > >>
> > >>  
> > >>
> > >
> > >
> >
>

>
> Hi all,
> 
> Thanks for the replies. I think I have successfully downloaded my presets into BCManager. I've looked over the resolution setting, and both are set to 96 from what I can see. The "defaults" and "LEDs" settings aren't the same betwee the two, would that be a concern?
> 
> I took a screenshot in case that might make it easier to diagnose. I tried changing my global ID to 1 and 2, as I noticed they were set to 1 and 8.
> 
> Just wanted to see if anyone notices anything I should try changing in this screenshot (or otherwise.) The seller has offered to refund me for the unit, but I just wanted to give the software end of troubleshooting some due diligence to save us both some hassle if possible. 
> 
> I was hopeful for that resolution setting, but it does seem that column is identical between the two B-Controls. Anything else look off?
> 
> Here's a screenshot link: http://i.imgur.com/s5XWOrQ.png
> 
> --- In bc2000@yahoogroups.com, "Royce" <rpcfender@> wrote:
> >
> > Hi Joey
> > I'm afraid that I mainly use my editor which is a bit tech and Mark's is much better for most people, but here goes
> > 
> > Start BC Manager
> > Click the left button "Show List of B-controls"
> > If your control isn't there then Menu "B-Control/New BCF2000"
> > This row should be highlighted so click menu 'Midi options" and select the Midi In and Out for your BCF and the program should find it.
> > 
> > Click the P button and the preset list comes up
> > On this new window press Menu "Midi / Receive" to download the preset list.
> > Select a preset 0 and press the circle within a circle button "Encoders'.
> > This will show you the details of the encoders
> > 
> > The encoders have a physical resolution of 96.
> > This means that there are 96 different spots when you turn the 
> > encoder 360 degrees.
> > 
> > The software parameter 'Resolutions' has a default 96 which means that each spot puts out a the next incremented value 1,2,3...
> > 
> > So if you had a range of 0 to 127 you would have to turn the encoder more than one whole turn to get to 127.
> > 
> > If you made the resolution  96 x 2 =192 then at each spot you would put out the old value + 2 eg ... 10,12,14...
> > 
> > If you made the resolution  96 / 2 =48 then at each spot you would put out the value twice before incrementing eg ... 10,10,11,11,12,12,...
> > 
> > Hope this helps
> > Royce
> > 
> > 
> > 
> > --- In bc2000@yahoogroups.com, Joey Robinson <jsrobinson@> wrote:
> > >
> > > I'd like to learn how to determine what my BCR resolution is set to, at
> > > that, so I can do a comparison.
> > > 
> > > On Wed, Feb 20, 2013 at 11:34 AM, Joey Robinson <jsrobinson@>wrote:
> > > 
> > > > Hey Royce and all,
> > > >
> > > > Thanks for the tip. I've found BCManager but I must admit I'm really in
> > > > the dark on how to use this.
> > > >
> > > > Is there a preset guide for idiots around? I've read the BCEdit as well as
> > > > the BCManager manual and I'm no less confused yet.
> > > >
> > > > Could anyone outline how to do a very standard edit of one single knob so
> > > > I can get started? I've gotten as far as having BCManager detect my
> > > > hardware, but as far as actually editing one of the presets or creating my
> > > > own, I'm totally not sure what to do. Please be as detailed as possible,
> > > > I'm fairly technically savvy but this has me in the dark.
> > > >
> > > > Thanks!
> > > >
> > > >
> > > > On Wed, Feb 20, 2013 at 2:34 AM, Royce <rpcfender@> wrote:
> > > >
> > > >> **
> > > >>
> > > >>
> > > >> Before you do anything with the physical encoder try changing the
> > > >> resolution by software.
> > > >> The encoders can have 4 different resolutions depending on what speed you
> > > >> are turning them and you can program this value.
> > > >>
> > > >> Check out my BC guide in the files area - SecretBC.pdf
> > > >>
> > > >> http://f1.grp.yahoofs.com/v1/PHskUZIMDc3g0_s6h1lddgdYgz7k32zhQ1JB32BGbgIlKt6SqffbH0_1EDZqWnO4iFMk9Zc02RRxmE0kSO-EAg/Documentation/SecretBC.pdf
> > > >>
> > > >> Get Mark's PC editor from his web site
> > > >> http://home.kpn.nl/f2hmjvandenberg281/
> > > >> <http://home.kpn.nl/f2hmjvandenberg281/>
> > > >>
> > > >> Program an encoder with different .resolution values to see if that makes
> > > >> a difference.
> > > >>
> > > >> All the best
> > > >> Royce
> > > >>
> > > >>
> > > >> --- In bc2000@yahoogroups.com, Joey Robinson <jsrobinson@> wrote:
> > > >> >
> > > >> > Hi all,
> > > >> >
> > > >> > I bought a new BCF 2000 off eBay, (in new condition), and am in need of
> > > >> > some serious help.
> > > >> >
> > > >> > The rotary knobs themselves have a fair bit of jumpiness or lag
> > > >> compared to
> > > >> > the BCR I just hooked up. The BCR feels fantastic, with a nice
> > > >> resolution
> > > >> > to the knobs. The BCF feels jumpy. I've tried everything I can think of
> > > >> and
> > > >> > have researched on google. I've ran the unit in every emulation mode,
> > > >> I've
> > > >> > tried straight midi mapping a knob to pan or a send, and also have tried
> > > >> > using Learn. The Learn button on the BCF seems to not work for mapping
> > > >> most
> > > >> > of the knobs.
> > > >> >
> > > >> > I am using Win7 x64 and have the latest x64 drivers from the Behringer
> > > >> site
> > > >> > installed. I've tried with every manner of "Mackie" or "BCF" control
> > > >> > surface mode in Ableton, as well as tried disabling/enabling the
> > > >> different
> > > >> > MIDI track options below. I've tried switching USB cables between the
> > > >> BCF
> > > >> > and BCR, nothing seems to make a difference. The knobs in general are
> > > >> much
> > > >> > looser on the BCF2000 than the BCR. They have a much worse resolution
> > > >> and
> > > >> > laggy feel than the BCR. I have no idea what else to try. Oh, and yes
> > > >> I'm
> > > >> > using the latest 1.10 firmware.
> > > >> >
> > > >> > I am also having an issue where the "left preset" browse button only
> > > >> works
> > > >> > half the time if in B-Control mode. The button is obviously dying, fresh
> > > >> > out of box. Are these buttons fixable?
> > > >> >
> > > >> > Thanks immensely for any help.
> > > >> >
> > > >>
> > > >>  
> > > >>
> > > >
> > > >
> > >
> >
>

>
> Hm. I noticed something odd. Even though the resolutions on both B-Controls show up as 96 in that screenshot I posted, the BCF turns "faster" (with less resolution) than the BCR knobs. I have to turn a knob on my BCR a good bit farther (which I don't mind) to reach the same point that the BCF reaches with less of a turn.
> 
> Not sure what might be affecting that.
> 
> --- In bc2000@yahoogroups.com, "bconfused2000" <jsrobinson@> wrote:
> >
> > Hi all,
> > 
> > Thanks for the replies. I think I have successfully downloaded my presets into BCManager. I've looked over the resolution setting, and both are set to 96 from what I can see. The "defaults" and "LEDs" settings aren't the same betwee the two, would that be a concern?
> > 
> > I took a screenshot in case that might make it easier to diagnose. I tried changing my global ID to 1 and 2, as I noticed they were set to 1 and 8.
> > 
> > Just wanted to see if anyone notices anything I should try changing in this screenshot (or otherwise.) The seller has offered to refund me for the unit, but I just wanted to give the software end of troubleshooting some due diligence to save us both some hassle if possible. 
> > 
> > I was hopeful for that resolution setting, but it does seem that column is identical between the two B-Controls. Anything else look off?
> > 
> > Here's a screenshot link: http://i.imgur.com/s5XWOrQ.png
> > 
> > --- In bc2000@yahoogroups.com, "Royce" <rpcfender@> wrote:
> > >
> > > Hi Joey
> > > I'm afraid that I mainly use my editor which is a bit tech and Mark's is much better for most people, but here goes
> > > 
> > > Start BC Manager
> > > Click the left button "Show List of B-controls"
> > > If your control isn't there then Menu "B-Control/New BCF2000"
> > > This row should be highlighted so click menu 'Midi options" and select the Midi In and Out for your BCF and the program should find it.
> > > 
> > > Click the P button and the preset list comes up
> > > On this new window press Menu "Midi / Receive" to download the preset list.
> > > Select a preset 0 and press the circle within a circle button "Encoders'.
> > > This will show you the details of the encoders
> > > 
> > > The encoders have a physical resolution of 96.
> > > This means that there are 96 different spots when you turn the 
> > > encoder 360 degrees.
> > > 
> > > The software parameter 'Resolutions' has a default 96 which means that each spot puts out a the next incremented value 1,2,3...
> > > 
> > > So if you had a range of 0 to 127 you would have to turn the encoder more than one whole turn to get to 127.
> > > 
> > > If you made the resolution  96 x 2 =192 then at each spot you would put out the old value + 2 eg ... 10,12,14...
> > > 
> > > If you made the resolution  96 / 2 =48 then at each spot you would put out the value twice before incrementing eg ... 10,10,11,11,12,12,...
> > > 
> > > Hope this helps
> > > Royce
> > > 
> > > 
> > > 
> > > --- In bc2000@yahoogroups.com, Joey Robinson <jsrobinson@> wrote:
> > > >
> > > > I'd like to learn how to determine what my BCR resolution is set to, at
> > > > that, so I can do a comparison.
> > > > 
> > > > On Wed, Feb 20, 2013 at 11:34 AM, Joey Robinson <jsrobinson@>wrote:
> > > > 
> > > > > Hey Royce and all,
> > > > >
> > > > > Thanks for the tip. I've found BCManager but I must admit I'm really in
> > > > > the dark on how to use this.
> > > > >
> > > > > Is there a preset guide for idiots around? I've read the BCEdit as well as
> > > > > the BCManager manual and I'm no less confused yet.
> > > > >
> > > > > Could anyone outline how to do a very standard edit of one single knob so
> > > > > I can get started? I've gotten as far as having BCManager detect my
> > > > > hardware, but as far as actually editing one of the presets or creating my
> > > > > own, I'm totally not sure what to do. Please be as detailed as possible,
> > > > > I'm fairly technically savvy but this has me in the dark.
> > > > >
> > > > > Thanks!
> > > > >
> > > > >
> > > > > On Wed, Feb 20, 2013 at 2:34 AM, Royce <rpcfender@> wrote:
> > > > >
> > > > >> **
> > > > >>
> > > > >>
> > > > >> Before you do anything with the physical encoder try changing the
> > > > >> resolution by software.
> > > > >> The encoders can have 4 different resolutions depending on what speed you
> > > > >> are turning them and you can program this value.
> > > > >>
> > > > >> Check out my BC guide in the files area - SecretBC.pdf
> > > > >>
> > > > >> http://f1.grp.yahoofs.com/v1/PHskUZIMDc3g0_s6h1lddgdYgz7k32zhQ1JB32BGbgIlKt6SqffbH0_1EDZqWnO4iFMk9Zc02RRxmE0kSO-EAg/Documentation/SecretBC.pdf
> > > > >>
> > > > >> Get Mark's PC editor from his web site
> > > > >> http://home.kpn.nl/f2hmjvandenberg281/
> > > > >> <http://home.kpn.nl/f2hmjvandenberg281/>
> > > > >>
> > > > >> Program an encoder with different .resolution values to see if that makes
> > > > >> a difference.
> > > > >>
> > > > >> All the best
> > > > >> Royce
> > > > >>
> > > > >>
> > > > >> --- In bc2000@yahoogroups.com, Joey Robinson <jsrobinson@> wrote:
> > > > >> >
> > > > >> > Hi all,
> > > > >> >
> > > > >> > I bought a new BCF 2000 off eBay, (in new condition), and am in need of
> > > > >> > some serious help.
> > > > >> >
> > > > >> > The rotary knobs themselves have a fair bit of jumpiness or lag
> > > > >> compared to
> > > > >> > the BCR I just hooked up. The BCR feels fantastic, with a nice
> > > > >> resolution
> > > > >> > to the knobs. The BCF feels jumpy. I've tried everything I can think of
> > > > >> and
> > > > >> > have researched on google. I've ran the unit in every emulation mode,
> > > > >> I've
> > > > >> > tried straight midi mapping a knob to pan or a send, and also have tried
> > > > >> > using Learn. The Learn button on the BCF seems to not work for mapping
> > > > >> most
> > > > >> > of the knobs.
> > > > >> >
> > > > >> > I am using Win7 x64 and have the latest x64 drivers from the Behringer
> > > > >> site
> > > > >> > installed. I've tried with every manner of "Mackie" or "BCF" control
> > > > >> > surface mode in Ableton, as well as tried disabling/enabling the
> > > > >> different
> > > > >> > MIDI track options below. I've tried switching USB cables between the
> > > > >> BCF
> > > > >> > and BCR, nothing seems to make a difference. The knobs in general are
> > > > >> much
> > > > >> > looser on the BCF2000 than the BCR. They have a much worse resolution
> > > > >> and
> > > > >> > laggy feel than the BCR. I have no idea what else to try. Oh, and yes
> > > > >> I'm
> > > > >> > using the latest 1.10 firmware.
> > > > >> >
> > > > >> > I am also having an issue where the "left preset" browse button only
> > > > >> works
> > > > >> > half the time if in B-Control mode. The button is obviously dying, fresh
> > > > >> > out of box. Are these buttons fixable?
> > > > >> >
> > > > >> > Thanks immensely for any help.
> > > > >> >
> > > > >>
> > > > >>  
> > > > >>
> > > > >
> > > > >
> > > >
> > >
> >
>