Thanks for the tip. I've found BCManager but I must admit I'm really in the dark on how to use this.
Is there a preset guide for idiots around? I've read the BCEdit as well as the BCManager manual and I'm no less confused yet.
Could anyone outline how to do a very standard edit of one single knob so I can get started? I've gotten as far as having BCManager detect my hardware, but as far as actually editing one of the presets or creating my own, I'm totally not sure what to do. Please be as detailed as possible, I'm fairly technically savvy but this has me in the dark.
Thanks!
On Wed, Feb 20, 2013 at 2:34 AM, Royce <rpcfender@yahoo.com.au> wrote:
Before you do anything with the physical encoder try changing the resolution by software.
The encoders can have 4 different resolutions depending on what speed you are turning them and you can program this value.
Check out my BC guide in the files area - SecretBC.pdf
http://f1.grp.yahoofs.com/v1/PHskUZIMDc3g0_s6h1lddgdYgz7k32zhQ1JB32BGbgIlKt6SqffbH0_1EDZqWnO4iFMk9Zc02RRxmE0kSO-EAg/Documentation/SecretBC.pdf
Get Mark's PC editor from his web site
http://home.kpn.nl/f2hmjvandenberg281/
Program an encoder with different .resolution values to see if that makes a difference.
All the best
Royce
--- In bc2000@yahoogroups.com, Joey Robinson wrote:
>
> Hi all,
>
> I bought a new BCF 2000 off eBay, (in new condition), and am in need of
> some serious help.
>
> The rotary knobs themselves have a fair bit of jumpiness or lag compared to
> the BCR I just hooked up. The BCR feels fantastic, with a nice resolution
> to the knobs. The BCF feels jumpy. I've tried everything I can think of and
> have researched on google. I've ran the unit in every emulation mode, I've
> tried straight midi mapping a knob to pan or a send, and also have tried
> using Learn. The Learn button on the BCF seems to not work for mapping most
> of the knobs.
>
> I am using Win7 x64 and have the latest x64 drivers from the Behringer site
> installed. I've tried with every manner of "Mackie" or "BCF" control
> surface mode in Ableton, as well as tried disabling/enabling the different
> MIDI track options below. I've tried switching USB cables between the BCF
> and BCR, nothing seems to make a difference. The knobs in general are much
> looser on the BCF2000 than the BCR. They have a much worse resolution and
> laggy feel than the BCR. I have no idea what else to try. Oh, and yes I'm
> using the latest 1.10 firmware.
>
> I am also having an issue where the "left preset" browse button only works
> half the time if in B-Control mode. The button is obviously dying, fresh
> out of box. Are these buttons fixable?
>
> Thanks immensely for any help.
>