Bc2000 (for the BCF2000 & BCR2000)

Basic Task: Pass MIDI note data to software.
Guitar (GK2A) => Roland GR30 (MIDI OUT) => BCR2000 (MIDI IN) => USB =>
PC (Band-in-a-Box, Power Tracks)
No Midi Note data is being received by the PC.
However, controller data is showing up in the MIDI monitor on channel 5.
U3 mode


--- In bc2000@yahoogroups.com, "Royce"  wrote:
>
> Tell us exactly what you are trying to do.
>
> The BCR2k can be programmed to output virtually all Midi messages.
> Make sure you have the latest manual from the Behringer website as
there were a lot of old ones in new BCRs.
> If you have a look at the pictures starting on page 8 you can see how
the BC can be connected in various ways including merging Midi data from
the BC with incoming Midi data from a keyboard and sending it to a PC.
>
> All of the switches and encoders can be programmed to send out
whatever Midi messages you want (with a limit on size of the messages)
>
> All the best
> Royce
>
> --- In bc2000@...m, "Jet Graphics" jetgraphics@ wrote:
> >
> > I am at an impasse.
> > The BCR2000's rotary controllers appear as undefined CC changes on
channel 5, but no note messages appear.
> > (PGMusic Power Tracks and Band in a Box)
> > I've tried several MIDI input devices (old Roland D-10, GR30, and a
"musicstar" midi controller.
> > Is it user error, hardware or software malevolence?
> >
> > --- In bc2000@yahoogroups.com, "tom649731"  wrote:
> > >
> > > Yes, it can act as a usb midi interface, with 1 IN, 1 OUT, and 1
THRU - in U3 mode.
> > >
> > > --- In bc2000@yahoogroups.com, "Jet Graphics"  wrote:
> > > >
> > > > Can the BCR2000 pass note messages from an external MIDI device
to a PC, via USB, running suitable software, and record the MIDI stream
on a track?
> > > > I cannot determine that by reading the manual.
> > > >
> > > > Thank you,
> > > > JG
> > > >
> > >
> >
>