Question 7/27
2013-07-27 by Jet Graphics
Can the BCR2000 pass note messages from an external MIDI device to a PC, via USB, running suitable software, and record the MIDI stream on a track? I cannot determine that by reading the manual. Thank you, JG
Thread
Question 7/27
Re: Question 7/27
2013-07-27 by tom649731
Yes, it can act as a usb midi interface, with 1 IN, 1 OUT, and 1 THRU - in U3 mode. --- In bc2000@yahoogroups.com, "Jet Graphics" <jetgraphics@...> wrote:
Show quoted textHide quoted text
> > Can the BCR2000 pass note messages from an external MIDI device to a PC, via USB, running suitable software, and record the MIDI stream on a track? > I cannot determine that by reading the manual. > > Thank you, > JG >
Re: Question 7/27
2013-07-27 by Jet Graphics
I am at an impasse. The BCR2000's rotary controllers appear as undefined CC changes on channel 5, but no note messages appear. (PGMusic Power Tracks and Band in a Box) I've tried several MIDI input devices (old Roland D-10, GR30, and a "musicstar" midi controller. Is it user error, hardware or software malevolence? --- In bc2000@yahoogroups.com, "tom649731" <tom.cuyt@...> wrote:
Show quoted textHide quoted text
> > Yes, it can act as a usb midi interface, with 1 IN, 1 OUT, and 1 THRU - in U3 mode. > > --- In bc2000@yahoogroups.com, "Jet Graphics" <jetgraphics@> wrote: > > > > Can the BCR2000 pass note messages from an external MIDI device to a PC, via USB, running suitable software, and record the MIDI stream on a track? > > I cannot determine that by reading the manual. > > > > Thank you, > > JG > > >
Re: Question 7/27
2013-07-28 by Royce
Tell us exactly what you are trying to do. The BCR2k can be programmed to output virtually all Midi messages. Make sure you have the latest manual from the Behringer website as there were a lot of old ones in new BCRs. If you have a look at the pictures starting on page 8 you can see how the BC can be connected in various ways including merging Midi data from the BC with incoming Midi data from a keyboard and sending it to a PC. All of the switches and encoders can be programmed to send out whatever Midi messages you want (with a limit on size of the messages) All the best Royce --- In bc2000@yahoogroups.com, "Jet Graphics" <jetgraphics@...> wrote:
Show quoted textHide quoted text
> > I am at an impasse. > The BCR2000's rotary controllers appear as undefined CC changes on channel 5, but no note messages appear. > (PGMusic Power Tracks and Band in a Box) > I've tried several MIDI input devices (old Roland D-10, GR30, and a "musicstar" midi controller. > Is it user error, hardware or software malevolence? > > --- In bc2000@yahoogroups.com, "tom649731" <tom.cuyt@> wrote: > > > > Yes, it can act as a usb midi interface, with 1 IN, 1 OUT, and 1 THRU - in U3 mode. > > > > --- In bc2000@yahoogroups.com, "Jet Graphics" <jetgraphics@> wrote: > > > > > > Can the BCR2000 pass note messages from an external MIDI device to a PC, via USB, running suitable software, and record the MIDI stream on a track? > > > I cannot determine that by reading the manual. > > > > > > Thank you, > > > JG > > > > > >
Re: Question 7/27
2013-07-28 by Jet Graphics
Basic Task: Pass MIDI note data to software. Guitar (GK2A) => Roland GR30 (MIDI OUT) => BCR2000 (MIDI IN) => USB => PC (Band-in-a-Box, Power Tracks) No Midi Note data is being received by the PC. However, controller data is showing up in the MIDI monitor on channel 5. U3 mode --- In bc2000@yahoogroups.com, "Royce" wrote: > > Tell us exactly what you are trying to do. > > The BCR2k can be programmed to output virtually all Midi messages. > Make sure you have the latest manual from the Behringer website as there were a lot of old ones in new BCRs. > If you have a look at the pictures starting on page 8 you can see how the BC can be connected in various ways including merging Midi data from the BC with incoming Midi data from a keyboard and sending it to a PC. > > All of the switches and encoders can be programmed to send out whatever Midi messages you want (with a limit on size of the messages) > > All the best > Royce > > --- In bc2000@...m, "Jet Graphics" jetgraphics@ wrote: > > > > I am at an impasse. > > The BCR2000's rotary controllers appear as undefined CC changes on channel 5, but no note messages appear. > > (PGMusic Power Tracks and Band in a Box) > > I've tried several MIDI input devices (old Roland D-10, GR30, and a "musicstar" midi controller. > > Is it user error, hardware or software malevolence? > > > > --- In bc2000@yahoogroups.com, "tom649731" wrote: > > > > > > Yes, it can act as a usb midi interface, with 1 IN, 1 OUT, and 1 THRU - in U3 mode. > > > > > > --- In bc2000@yahoogroups.com, "Jet Graphics" wrote: > > > > > > > > Can the BCR2000 pass note messages from an external MIDI device to a PC, via USB, running suitable software, and record the MIDI stream on a track?
Show quoted textHide quoted text
> > > > I cannot determine that by reading the manual. > > > > > > > > Thank you, > > > > JG > > > > > > > > > >
Re: Question 7/27
2013-07-28 by Jet Graphics
RESOLVED Turns out that both programs list TWO BCR2000 input devices, port 1, and port 2 in their MIDI setups. I changed the default from port 1 to port 2, and now both programs "See" the MIDI NOTES. Just one of those undocumented "features" - eh? --- In bc2000@yahoogroups.com, "Jet Graphics" <jetgraphics@...> wrote:
Show quoted textHide quoted text
> > > Basic Task: Pass MIDI note data to software. > Guitar (GK2A) => Roland GR30 (MIDI OUT) => BCR2000 (MIDI IN) => USB => > PC (Band-in-a-Box, Power Tracks) > No Midi Note data is being received by the PC. > However, controller data is showing up in the MIDI monitor on channel 5. > U3 mode > > > --- In bc2000@yahoogroups.com, "Royce" wrote: > > > > Tell us exactly what you are trying to do. > > > > The BCR2k can be programmed to output virtually all Midi messages. > > Make sure you have the latest manual from the Behringer website as > there were a lot of old ones in new BCRs. > > If you have a look at the pictures starting on page 8 you can see how > the BC can be connected in various ways including merging Midi data from > the BC with incoming Midi data from a keyboard and sending it to a PC. > > > > All of the switches and encoders can be programmed to send out > whatever Midi messages you want (with a limit on size of the messages) > > > > All the best > > Royce > > > > --- In bc2000@yahoogroups.com, "Jet Graphics" jetgraphics@ wrote: > > > > > > I am at an impasse. > > > The BCR2000's rotary controllers appear as undefined CC changes on > channel 5, but no note messages appear. > > > (PGMusic Power Tracks and Band in a Box) > > > I've tried several MIDI input devices (old Roland D-10, GR30, and a > "musicstar" midi controller. > > > Is it user error, hardware or software malevolence? > > > > > > --- In bc2000@yahoogroups.com, "tom649731" wrote: > > > > > > > > Yes, it can act as a usb midi interface, with 1 IN, 1 OUT, and 1 > THRU - in U3 mode. > > > > > > > > --- In bc2000@yahoogroups.com, "Jet Graphics" wrote: > > > > > > > > > > Can the BCR2000 pass note messages from an external MIDI device > to a PC, via USB, running suitable software, and record the MIDI stream > on a track? > > > > > I cannot determine that by reading the manual. > > > > > > > > > > Thank you, > > > > > JG > > > > > > > > > > > > > > >