Bc2000 (for the BCF2000 & BCR2000)

RESOLVED 

Turns out that both programs list TWO BCR2000 input devices, port 1, and port 2 in their MIDI setups. 
I changed the default from port 1 to port 2, and now both programs "See" the MIDI NOTES.

Just one of those undocumented "features" - eh?


--- In bc2000@yahoogroups.com, "Jet Graphics" <jetgraphics@...> wrote:
>
> 
> Basic Task: Pass MIDI note data to software.
> Guitar (GK2A) => Roland GR30 (MIDI OUT) => BCR2000 (MIDI IN) => USB =>
> PC (Band-in-a-Box, Power Tracks)
> No Midi Note data is being received by the PC.
> However, controller data is showing up in the MIDI monitor on channel 5.
> U3 mode
> 
> 
> --- In bc2000@yahoogroups.com, "Royce"  wrote:
> >
> > Tell us exactly what you are trying to do.
> >
> > The BCR2k can be programmed to output virtually all Midi messages.
> > Make sure you have the latest manual from the Behringer website as
> there were a lot of old ones in new BCRs.
> > If you have a look at the pictures starting on page 8 you can see how
> the BC can be connected in various ways including merging Midi data from
> the BC with incoming Midi data from a keyboard and sending it to a PC.
> >
> > All of the switches and encoders can be programmed to send out
> whatever Midi messages you want (with a limit on size of the messages)
> >
> > All the best
> > Royce
> >
> > --- In bc2000@yahoogroups.com, "Jet Graphics" jetgraphics@ wrote:
> > >
> > > I am at an impasse.
> > > The BCR2000's rotary controllers appear as undefined CC changes on
> channel 5, but no note messages appear.
> > > (PGMusic Power Tracks and Band in a Box)
> > > I've tried several MIDI input devices (old Roland D-10, GR30, and a
> "musicstar" midi controller.
> > > Is it user error, hardware or software malevolence?
> > >
> > > --- In bc2000@yahoogroups.com, "tom649731"  wrote:
> > > >
> > > > Yes, it can act as a usb midi interface, with 1 IN, 1 OUT, and 1
> THRU - in U3 mode.
> > > >
> > > > --- In bc2000@yahoogroups.com, "Jet Graphics"  wrote:
> > > > >
> > > > > Can the BCR2000 pass note messages from an external MIDI device
> to a PC, via USB, running suitable software, and record the MIDI stream
> on a track?
> > > > > I cannot determine that by reading the manual.
> > > > >
> > > > > Thank you,
> > > > > JG
> > > > >
> > > >
> > >
> >
>