Bc2000 (for the BCF2000 & BCR2000)

thanks jim!  I was unable to get the editor to work but I use the one
by birdie with good results.

sorry for the late reply.  


Will

--- In bc2000@yahoogroups.com, "jazzman" <jim.savery@c...> wrote:
>
> Hi Will:
> 
> The B-Control's ability to have it's function buttons (e.g. EDIT, LEARN,
> PRESET, etc.) overwritten is indeed preset-specific.  For example,
you could
> have a "Preset 01" in the BCR2000 set up with its normal/typical
> functionality:
>  
> EDIT = Edit Function (as silk-screened on the unit)
>  
> Additionally, you could also have a "Preset 02" on the same BCR2000
set up
> with a custom message type (program change, midi cc, midi note command)
> assigned to this same EDIT button, instead of the typical edit
functionality
> described in the owner's manual.  
> 
> Overwriting these functions on the BCR is accomplished via the BC EDIT
> software, and is described in detail in the documentation that
accompanies
> this free download on our website:
>  
>
http://www.behringer.com/05_support/bc_download/bc_downloads.cfm?lang=ENG
>  
> Hint: When clicking on the "presets" page of the EDITOR section of
the BC
> EDIT software, the "Lock Preset" option would need to be disengaged
in order
> to overwrite the factory functionality of the control parameters
mentioned
> above.
> 
> I hope this information helps!
> 
> Best Regards,
> 
> 
> Jim Savery
> Global Customer Service & Support Manager
> BEHRINGER Group
> Tel: +01-425-672-0816 x 111
> Direct Dial: +01-425-939-3216
> Fax: +01-425-673-7647
> IP Phone Ext: 5024
> mailto:custservusa@b...
> http://www.behringer.com
>