Bc2000 (for the BCF2000 & BCR2000)

Hi
have you checked out the file section ? There is an Evolver preset already there

A link to down load the file...
http://f1.grp.yahoofs.com/v1/YIsHSRd2SCinkc4pJhROtTkYgjq-gIuk4jMSNE7H4FAaeLlcFBDaq0pgGGH9OayQe7ryllGgVXexbY_Lb6gSKQ/The%20Maker%20Evolver%20Editor%200.1.zip

All the best
Royce

> I'm just got the BCR2000 and am trying to give some knobs to my DSI
> Evolver. (stand alone 1) It appears to be comminicating back and
> forth with the Evolver, and I'm attempting to program via "learn"
> function. Unfortunately, the BCR is only controlling a +/-15 range.
> I don't know why it's not controlling the full amount available to be
> controlled? For ex.
>
> I want rotary encoder 'A' to control the Evolver's 'filter frequency.'
> The BCR will accept the parameter function, but will only ACTUALLY
> move the parameter from, say, 30 to 45. Or 80 - 105. As the BCR is
> "learning," it flashes BAD as I turn a knob on the Evolver. When I
> stop turning, it says GOOD. After exiting that mode, I begin playing
> and the knob only controls the aforementioned 15 unit range. I'm
> trying to troubleshoot, but I'm wasting valuable time.
>
> Anyone have any ideas as to how to fix this?
>
> Please and Thank You
>