If you look at the schematic, you will see how the pot connects up. One end
goes to ground, the other end goes to the non-switched terminal of the CV
jack, and the center pin (wiper) goes to the pad marked CV. The switched
termianl of the jack goes to +15.
Ken
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
goes to ground, the other end goes to the non-switched terminal of the CV
jack, and the center pin (wiper) goes to the pad marked CV. The switched
termianl of the jack goes to +15.
Ken
>I'm almost done building the digital noise module,_______________________________________________________________________
>except I can't find the 4006 IC very easily. Any
>comparable replacements? I'm also not 100% sure where
>the potentiometer hooks up. Is it at CLKO?
>Thanks, Daryl
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>