cool cool. thanks for the info. second part i am dealing with is that when plugged in, i get no signal. correction, i get practically no signal. most likely i have the pins on the jacks configured wrong, or the guy i got it from configured them wrong. the jacks are panel mount with 3 pins coming off them. the right pin (if the tip connector is at top) which goes to the plate with the screw, is what i am using for the ground, the middle terminal, which is in the middle sandwich of the jack as well, i am using for the signal, and the left terminal, which is in the top of the sandwich, i have nothing connected to. i am sorry if i am making this explaination more confusing than it should be. any help is appreciated. thank you all.
-haven sole
-haven sole
----- Original Message -----
From: sasami@...
To: cgs_synth@yahoogroups.com
Sent: Wednesday, August 10, 2005 7:44 PM
Subject: Re: [cgs_synth] stiener pcb wiring
Those pads are to allow different sized capacitors to be installed. Nothing
else needs to connect to them.
Ken
>hey all, sorry if this is basic newbie stuff, but i'm having some real
>problems wiring my pcb for the steiner vcf. i inherited the pcb from a
>friend who was leaving the country and it was already half built.
>rummaging around my parts, i found all the needed ones and finished
>the soldering. now, there is a hole on each side of the 100n cap in
>between the 2 2n2222's that i'm not sure what goes in them, or if
>anything goes in them. 1 above each of the 2n2 caps that are lined up
>next to each other.
>
>
>
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
>
>
>
_______________________________________________________________________
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
The CGS Modular Synth home page: http://www.cgs.synth.net/
------------------------------------------------------------------------------
YAHOO! GROUPS LINKS
a.. Visit your group "cgs_synth" on the web.
b.. To unsubscribe from this group, send an email to:
cgs_synth-unsubscribe@yahoogroups.com
c.. Your use of Yahoo! Groups is subject to the Yahoo! Terms of Service.
------------------------------------------------------------------------------
[Non-text portions of this message have been removed]