Cgs synth

>hey thanks alot ken - allmost have it finished up. i was just rereading the

pages and it

>mentions not installing the 47k and 100k resistors on the buffer boards...

is that just for

>the dual/connected bufferboard? since i have a total of 4 do i take them

out of all of them

>except one or just the connected one? my brain hurts today i'm sorry!

That is the reference divider. Only one is needed.

>also i am short one
>4081 and am going to see if a 4093 works - if not gota wait till monday...

thanks again!

Nah, it will be up-side down, and foul up the logic.

Ken

>
>
>dave
>
>
>--- In cgs_synth@yahoogroups.com, sasami@... wrote:
>>
>> Just pretend all the outputs on the preset board are labelled "F1" to "F8"
>> or "P1" to "P8" depending ont he type of output you want, then wire them to
>> the corresponding F or P inputs on the buffers.
>>
>>
>>
>> >hey everyone - been working on a giant gate sequencer/drum machine project.
>> >so i've gotten everything working - have the preset board working as 4
>> outs. but
>> >looking at the schematics and looking at the preset board pcb my mind

hurts!

>> >do i need to cut traces and reconfigure the board if i want to use it as 8
>> individual
>> >out on/off triggers? i have the buffer boards etc... but maybe someone

can just

>> >say yes dave you need to - then i'll do it :)
>> >
>> >any words on encouragement or tips welcome thanks
>> >
>> >dave wright
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> >The CGS Modular Synth home page: http://www.cgs.synth.net/
>> >
>> >Yahoo! Groups Links
>> >
>> >
>> >
>> >
>> >
>> >
>> >
>> _______________________________________________________________________
>> Ken Stone sasami@... or sasami@...
>> Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
>> Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
>>
>
>
>
>
>
>
>
>
>The CGS Modular Synth home page: http://www.cgs.synth.net/
>
>Yahoo! Groups Links
>
>
>
>
>
>
>

_______________________________________________________________________
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>