Cgs synth

re. +5v for the Philips - I had a feeling, although I couldn't find
any specs about that :)

I'm also not sure why the fairchild's didn't work while the ST's did.
No worries though as I got it all sorted out.

It could have been just a freak occurrence though, so take my
observations with a grain of salt.

Cheers,
michel

--- In cgs_synth@yahoogroups.com, "Laurie Biddulph" <elby_designs@...>
wrote:

>
> The Phillips chips are for 5V (74HCxxxx) use only so they wouldn't have
> worked here. Surprised the Fairchild chips didn't work. I will see

if I can

> get some time to check it out at my end.,
>
> Best Regards
>
> (Mr) Laurie Biddulph
> Phone: +61 (0)2 4340 0938
> Mobile: 0400 257 645
>
> Elby Designs
> ABN: 70 022 727 605
> http://www.elby-designs.com
>
> This e-mail and any files transmitted with it are confidential and

intended

> for the addressee only.
> If you are not the addressee you may not copy, forward, disclose or
> otherwise use it, or any part of it, in any form whatsoever. If you

have

> received this e-mail in error please notify the sender and ensure

that all

> copies of this e-mail and any files transmitted with it are deleted.
> Any views or opinions represented in this e-mail are solely those of

the

> author and do not necessarily represent those of Elby Designs.
> Although this e-mail and its attachments have been scanned for the

presence

> of computer viruses, Elby Designs will not be liable for any losses

as a

> result of any viruses being passed on.
>
> ----- Original Message -----
> From: "megons" <megons@...>
> To: <cgs_synth@yahoogroups.com>
> Sent: Wednesday, April 25, 2007 9:08 PM
> Subject: [cgs_synth] observations about bad/overheating 4017's
>
>
> >I ordered a Burst Generator and Sub-Oscillator from Elby and they
> > shipped with Fairchild 4017's. Neither of them worked so I bought a
> > couple of Philips 74HC4017N's and some ST 4017's.
> >
> > The ST's worked fine, however the Philips overheat in both circuits.
> >
> > So avoid Fairchild and Philips 4017's!
> >
> > This might be related to the exploding TI 4017's mentioned in message
> > #1968.
> >
> > Could it be that 15v is too much for the Philips and TI's?
> >
> >
> >
> >
> > The CGS Modular Synth home page: http://www.cgs.synth.net/
> >
> > Yahoo! Groups Links
> >
> >
> >
> >
>