Hi Mark,
Thanks for this. My system is in Frac and Eurorack format, but I'd be
interested in expanding to other formats as well. As for the power
supply, my understanding is that the CGS kits can be powered by PSUs
like the one Blacet makes, right? I'd much rather buy one pre-made, as
you suggest, I just want to ensure that I get the right one.
Thanks again for your reply.
Best,
Matt
Thanks for this. My system is in Frac and Eurorack format, but I'd be
interested in expanding to other formats as well. As for the power
supply, my understanding is that the CGS kits can be powered by PSUs
like the one Blacet makes, right? I'd much rather buy one pre-made, as
you suggest, I just want to ensure that I get the right one.
Thanks again for your reply.
Best,
Matt
On 3-Jun-08, at 9:42 AM, Mark wrote:
> On 6/2/08, Matt Patey put forth:
> >
> >I've spent a considerable amount of time with my pre-built modules.
> >I'd really like to start building a small entirely CGS-based system,
> >but I'm worried about choosing the best way to power the system and
> >getting front panels designed for all of the modules,
>
> If you have pre-built modules, then it seems you already have a power
> supply. If you need another power supply, then the best way is to
> buy one. You can buy a better power supply for less money than you
> can build yourself.
>
> While you don't mention which format you are using, that will
> determine which panels are already available. If you run Windows you
> can order panels using fpd files. You might want to check out the
> ModularSynthPanels yahoogroup.
>
> >not to mention getting snagged on problems I don't understand.
>
> If you do get stuck, there are plenty of forums where you can ask
> for help.
>
>
>