Cgs synth

>I have a question - how does the Up/down jack wire in? This is how
>I'm reading it:

UD switch - Top to +15, middle to SW pad, bottom not connected at all.

UD jack - signal connector wired to UD pad.

>Also - what the RSS pad on the pcb for?

If you want, it is possible to add a rotary switch to select your sequence
lengths. Gate outputs are wired to a 10 way switch (you need the two blank
positions - one at either end. The common of this switch goes to RSS (ReSet
Switch).

Ken
_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>