Wow. That you so much for all your help folks.
I did indeed have the MOTM power header installed backwards. So I re-installed it correctly and it no longer pulls down the Q960, and the pins measure +/-15v.
I haven't had time yet to test all the other functions, I just wanted to give this update and say thanks.
Russ M.
I did indeed have the MOTM power header installed backwards. So I re-installed it correctly and it no longer pulls down the Q960, and the pins measure +/-15v.
I haven't had time yet to test all the other functions, I just wanted to give this update and say thanks.
Russ M.
--- In cgs_synth@yahoogroups.com, Richard Brewster <pugix@...> wrote:
>
> Very good point. The CGS75 board has the orientation of the 4-pin MOTM
> MTA header facing IN, so that if you use a standard MOTM power cable,
> the wires exit on the inside, going back over the board components.
> This is the reverse of MOTM boards.
>
> Richard Brewster
> http://www.pugix.com
>
> On 10/29/10 7:29 AM, Ove Ridé wrote:
> > Is the power header correctly mounted to the board and connected?
> >
>