Cheers Ken
Where is the best place to tap 'pos' and 'neg' busses from on that board ?
________________________________
From: "sasami@..." <sasami@...>
To: cgs_synth@yahoogroups.com
Sent: Wednesday, September 12, 2012 1:20 PM
Subject: Re: [cgs_synth] CGS 40 - Modulo Magic
Schematic is incorrect. I'll fix it. Thanks for pointing it out.
Correct:
circuitry driving the switches, and the addition of stabilizing caps across
the op-amps.
Ken
__________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
[Non-text portions of this message have been removed]
Where is the best place to tap 'pos' and 'neg' busses from on that board ?
________________________________
From: "sasami@..." <sasami@...>
To: cgs_synth@yahoogroups.com
Sent: Wednesday, September 12, 2012 1:20 PM
Subject: Re: [cgs_synth] CGS 40 - Modulo Magic
>I have run into a problem , i am changing out the 100K resistors for the560K and 470K and there are some conflicting pieces of information.
Schematic is incorrect. I'll fix it. Thanks for pointing it out.
Correct:
>OFS and REF - 470KSignificantly, but the functionality is the same. The changes are in the
>
> SS - 560K
>Also , i have the earlier version of the CGS40 not the 1.2 Version.
>
>Is the schematic any different ?
circuitry driving the switches, and the addition of stabilizing caps across
the op-amps.
Ken
__________________________________________________________
Ken Stone sasami@... otherunicorn@...
Modular Synth PCBs for sale <http://www.cgs.synth.net/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>
[Non-text portions of this message have been removed]