>Hi everyone. I've just finished populating my master divider boardYes.
>and I am trying to figure out what the front panel layout should
>be. I am unsure as to what B1, B2, D1 and D2 are on the schematic.
>Is this the phase shifting network?
1 = clk divided by 2
2 = clk divided by 4
3 = clk divided by 8
4 = clk divided by 16
5 = clk divided by 32
6 = clk divided by 64
as such /2, /4, /8, /16, etc would be okay.
A is rising edge of output pulse falls on a rising edge of the clock pulse.
C is rising edge is 180 degrees out of phase from A.
B and D are at 90 degrees and 180 degrees respectively BUT as these are
switched, you cannot specifiy the division on the jacks - it instead myst be
around the switch knob.
>Sorry if this is a stupid question. IStupid? No. This module has even confused its creator on occasions!
>understand what the module is used for, but I don't understand how
>the layout is implemented. Any pointers would be great. Thanks.
Ken
_______________________________________________________________________
Ken Stone sasami@... or sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>