Yahoo Groups archive

Cgs synth

Index last updated: 2026-04-28 23:16 UTC

Thread

ASR caps...

ASR caps...

2003-01-08 by drg3orge <doc@trocarrecords.com>

h3y all,
any suggestions for the ASR CX caps. the smallest lead spacin' i can
find is 10mm which seems rather wide. anythin' bigger than 47nF
seems to jump to 15mm.
any help would be duly appreciated...
thanks,
doc

Re: ASR caps...

2003-01-09 by sasami@hotkey.net.au

I used MKT, which is not ideal, but works okay. Lower voltage capacitors
should have a smaller pin spacing. Rifa, Wima, etc make these.

Ken
Show quoted textHide quoted text
>h3y all,
>any suggestions for the ASR CX caps. the smallest lead spacin' i can
>find is 10mm which seems rather wide. anythin' bigger than 47nF
>seems to jump to 15mm.
>any help would be duly appreciated...
>thanks,
>doc
>
>
>
>
>See the following URLS for the CGS Modular Synth home page:
>Main: http://www.cgs.synth.net/
>Secondary: http://otherunicorn.0catch.com/synth/
>To unsubscribe from this group, send an email to:
>cgs_synth-unsubscribe@yahoogroups.com
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
_______________________________________________________________________
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>

Re: ASR caps...

2003-01-09 by knarleybass <knarleybass@yahoo.com>

I used a MKT cap for it, hopefully it will be just fine. here is a
parts list with Mouser part #'s

http://www.bobknarley.com/synth/cgsasrparts.html
Show quoted textHide quoted text

--- In cgs_synth@yahoogroups.com, "drg3orge <doc@t...>"
<doc@t...> wrote:
> h3y all,
> any suggestions for the ASR CX caps. the smallest lead
spacin' i can
> find is 10mm which seems rather wide. anythin' bigger than
47nF
> seems to jump to 15mm.
> any help would be duly appreciated...
> thanks,
> doc

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.