new CGS09, comparator output possible?
2003-06-11 by Fernando
Hi,
It is possible to use the comparator alone? How?
Thanks in advance.
Cheers,
Fernando
It is possible to use the comparator alone? How?
Thanks in advance.
Cheers,
Fernando
Thread
new CGS09, comparator output possible?
Re: new CGS09, comparator output possible?
2003-06-11 by sasami@hotkey.net.au
Well ... Not as it stands. Basically, it was done this way to emulate the
Serge, shortcomings and all.
If you were to connect a 1k resistor to pin 7 of IC1B (the one without the
pin numbers on the diagram!) you could then use that as the output, but it
would still be connected to the rest of the divider circuitry all of the
time too.
Ken
Serge, shortcomings and all.
If you were to connect a 1k resistor to pin 7 of IC1B (the one without the
pin numbers on the diagram!) you could then use that as the output, but it
would still be connected to the rest of the divider circuitry all of the
time too.
Ken
Show quoted textHide quoted text
>Hi,_______________________________________________________________________
>
>It is possible to use the comparator alone? How?
>Thanks in advance.
>
>Cheers,
>
>Fernando
>
>
>
>
>
>See the following URLS for the CGS Modular Synth home page:
>Main: http://www.cgs.synth.net/
>Secondary: http://otherunicorn.0catch.com/synth/
>To unsubscribe from this group, send an email to:
>cgs_synth-unsubscribe@yahoogroups.com
>
>
>
>Your use of Yahoo! Groups is subject to http://docs.yahoo.com/info/terms/
>
>
>
Ken Stone sasami@...
Modular Synth PCBs for sale <http://www.blaze.net.au/~sasami/synth/>
Australian Miniature Horses & Ponies <http://www.blaze.net.au/~sasami/>