Datacolor User to User Support Group.

In a message dated 1/12/08 11:25:03 AM, lewronda@... writes:


> The problem is, after measuring / scanning the colour template (255)
> The program fails to respond in "create profile" mode after about 75%
> of the progress bar is displayed.
> 
If it can't build a profile from your measurement set, then the set is 
probably incomplete or in error. Try opening the measurement set in the lower half 
of the "Read Patches" page as an existing measurement set. Click on the target 
view to enlarge it, and then toggle between the 1 and 3 keys to see the pure 
and the measured target values. Are their any out of place colors in your 
measured values?   If so use the arrow keys to reach them, and remeasure (keep in 
mind you'll need to have the spectro plugged in, and calibrated, in order to 
make measurements). Once you have a full measurement set of appropiate values, 
it should build a profile just fine. If not, you'll need to send Dave Miller or 
myself a copy of your measurement XML file to troubleshoot.

C. David Tobie
Product Technology Manager
Digital Imaging & Home Theater
Datacolor Inc.
CDTobie@...
www.datacolor.com/spyder3


**************
Start the year off right.  Easy ways 
to stay in shape.
     
http://body.aol.com/fitness/winter-exercise?NCID=aolcmp00300000002489