1.What do you mean by your that my "LUT is not probably correct"?
2.What timing should I adjust?
3. Telling me that I should "look into what might be conflicting with
the Datacolor LUT loading" is not real helpful. What makes you think
soething is conflicting? This is a fairly clean install of Vista 64.
What do you suggest I should be looking for? I have wasted hours and
hours attempting to figure this out.
If your LUT data is correct, meaning the data that our Utility asked the OS to load is actually still loaded, then when we check it every minute, you should not be seeing any type of blip. So if you are seeing a blip, that would tend to imply that the OS, or some other application or utility, has loaded incorrect data. Thats not the only possibility, but its far the most likely. And its outside our control, its something you'd have to look for yourself, a startup item, or something else going on. Sorry to not be more help with that...
C. David Tobie
WW Product Technology Manager
Digital Imaging & Home Theater
Datacolor
CDTobie@...
www.datacolor.com/Spyder3
www.colorvision.com
-----Original Message-----
Show quoted textHide quoted text
From: madigan_bill
To: colorvision_group@yahoogroups.com
Sent: Tue, 16 Dec 2008 12:53 am
Subject: [colorvision_group] Re: How often does the Utility need to load the VIdeo Card LUT?
1.What do you mean by your that my "LUT is not probably correct"?
2.What timing should I adjust?
3. Telling me that I should "look into what might be conflicting with
the Datacolor LUT loading" is not real helpful. What makes you think
soething is conflicting? This is a fairly clean install of Vista 64.
What do you suggest I should be looking for? I have wasted hours and
hours attempting to figure this out.
...
--- In colorvision_group@yahoogroups.com, CDTobie wrote:
>
>
>
>
> I notice that my monitor shows a little "blip" every minute. I
assume
> that is because the Spyder3 v 3.06 Utility preference has a
> setting "Load Video Card Lookup Table Every: it is set to 1 minute.
I
> assume that is that is the default setting. Is it necessary to load
the
> LUT that often. The screen "disturbance" I see is a bit
disconcerting.
> I suppose I will get accustomed to it, now that I know (or think I
> know) what is causing it.
>
> ___
> This indicates, not just that Spyder3Utility is checking the LUT,
but if it blips every minute, it would also imply that your LUT is
not probably correct, or you would not be seeing the blip. So, as
well as adjusting the timing, look into what might be conflicting
with the Datacolor LUT loading...
>
>
> C. David Tobie
> WW Product Technology Manager
> Digital Imaging & Home Theater
> Datacolor
> CDTobie@...
> www.datacolor.com/Spyder3
>
> www.colorvision.com
>
>
> -----Original Message-----
> From: madigan_bill
> To: colorvision_group@yahoogroups.com
> Sent: Sun, 14 Dec 2008 3:57 pm
> Subject: [colorvision_group] How often does the Utility need to
load the VIdeo Card LUT?
>
>
>
>
>
>
>
>
> I notice that my monitor shows a little "blip" every minute. I
assume
> that is because the Spyder3 v 3.06 Utility preference has a
> setting "Load Video Card Lookup Table Every: it is set to 1 minute.
I
> assume that is that is the default setting. Is it necessary to load
the
> LUT that often. The screen "disturbance" I see is a bit
disconcerting.
> I suppose I will get accustomed to it, now that I know (or think I
> know) what is causing it.
>
> I asked tech support the following question but did not receive an
> answer.
>
> Is Cerification necessary with the new verson 3.06 Utility? Under
the
> Certification preference tab, the certification is checking every
hour.
> I believe Certification checks to make sure the LUT is being
loaded.
> Since the LUT is being reloaded every minute, does Certification
just
> verify that it is being loaded? I added Certificaton when I
calibrated
> so I would know that the LUT was loaded - did not know how to
verify
> that with version 3.04. on Vista 64
>
> Is their a document describing the preference settings in the
Utility?
>
>
> ------------------------------------
>
> Yahoo! Groups Links
>
------------------------------------
Yahoo! Groups Links
<*> To visit your group on the web, go to:
http://groups.yahoo.com/group/colorvision_group/
<*> Your email settings:
Individual Email | Traditional
<*> To change settings online go to:
http://groups.yahoo.com/group/colorvision_group/join
(Yahoo! ID required)
<*> To change settings via email:
mailto:colorvision_group-digest@yahoogroups.com
mailto:colorvision_group-fullfeatured@yahoogroups.com
<*> To unsubscribe from this group, send an email to:
colorvision_group-unsubscribe@yahoogroups.com
<*> Your use of Yahoo! Groups is subject to:
http://docs.yahoo.com/info/terms/