Yahoo Groups archive

Datacolor User to User Support Group.

Index last updated: 2026-04-28 23:18 UTC

Thread

Spyder 4 Express,blurry screen

Spyder 4 Express,blurry screen

2012-11-05 by berghike

Good day!
I have just calibrated my ASUS VH222H monitor with Spyder 4.
Colors look great however,the screen is slightly blurry on the right
hand side for about a third of the screen.
Any ideas how to fix this?
Many Thanks

Re: [datacolor_group] Spyder 4 Express,blurry screen

2012-11-05 by C D Tobie


On Nov 5, 2012, at 4:07 PM, "berghike" <berghike@...> wrote:

I have just calibrated my ASUS VH222H monitor with Spyder 4.
Colors look great however,the screen is slightly blurry on the right
hand side for about a third of the screen.
Any ideas how to fix this?

ICC profiles have calibration data that is applied to the entire screen at the video card level, and a display description that it is assigned at the OS level, and applied by applications who pick that up from the OS. Both of these functions are global, and either effect the entire screen, or not at all. There is no mechanism for an ICC profile, or a VLUT in the video card, to affect one section of the screen only. I wish there was, as we could correct color and brightness across the screen (uniformity)if that was possible. So I can't see any way that a profile is causing your issue, though some bug in the video card or elsewhere might be being triggered with the calibration application, so will show up at that point.

C. David Tobie

Global Product Technology Manager



Datacolor
5 Princess Road

Lawrenceville, NJ 08648, USA

609.924.2189


Phone: 207.685.9248

Mobile: 207.312.0448

Fax: 207.685.4455

Skype: cdtobie

Re: Spyder 4 Express,blurry screen

2012-11-06 by berghike

Many thanks for the quick reply.

I managed to sort out the problem by deleting AMD Catalyst software,resetting the monitor and then recalibrating with Spyder!

Thanks again.

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.