Disklavier

Spencer

The link you gave below does not lead to the latest version of your program.

Kind regards

Geoff

From: disklavier@yahoogroups.com [mailto:disklavier@yahoogroups.com] On Behalf Of Spencer Chase
Sent: Wednesday, 26 February 2014 1:29 AM
To: disklavier@yahoogroups.com
Subject: Re: [disklavier] DKV volume

my midimod2 program will move all pedal data to channel 3 if you select the "pedal events on ch 3" checkbox. if this is all you want to do, leave the default preset of "no change" for velocity modifications. you can do single files or whole folders in batch mode. the program may be found on my download page http://spencerserolls.com/Files4Download.html

On 2/25/2014 12:03 AM, Skanter123 wrote:

As i look at event lists from DKV files (from eCompetitions) it seems that #67 is soft pedal. Sustain data is all #64, both on/off and incremental.

I don't know how to batch copy all pedal data to another channel (at least with the sequencer I have here at home), but I certainly can move everything to ch 1. Ill try this and report back. Thanks!

Sam

www.keyboardcollective.com

(212) 684-3304

On Feb 25, 2014, at 2:46 AM, Bill Brandom <billbrando@...> wrote:

If you have both on/off and incremental on channel 1, then copy all of the pedal data (Controllers 64 and 67) to channel 3.

If you can't extract the pedal data from the note data, and

if you are making Piano-only music, try just copying ALL of the note and pedal data on channel 1 to channel 3.

Bill

On Feb 24, 2014, at 11:35 PM, Sam Kanter <skanter123@...> wrote:

Bill, not sure what you mean here. How would I copy MIDI half-pedal (controller #67) from channel 1 to channel 3 on MIDI files that have both on ch 1? I am referring to files that already have the half-pedal data.

Sam Kanter
www.keyboardcollective.com
(212) 684-3304

On Tue, Feb 25, 2014 at 2:04 AM, Bill Brandom <bill.brandom03@...> wrote:

Sam,

I believe you can copy your on/off pedal data from channel one to channel 3 on both types of MIDI files. Leave your on/off pedal data on channel 1 and then make your incremental modifications to the on/off pedal data on channel 3. You should be fine.

Bill

On Feb 24, 2014, at 9:58 PM, Skanter123 <skanter123@...> wrote:

Hello everyone,

Geoff and Spence have both been incredibly generous in trying to help me with the clunking, noisy damper pedal on my MK II DKV when playing back MIDI files.

After trying Spence's pedal on/off program to no avail, we are realizing that the older DKVs like the MKII receive damper on/off data on ch 1, and half-pedal data on ch 3.

Can anyone enlighten us on what type of MIDI files (0 or1) have pedal info on ch 3? Is there a way to extract this data that might be embedded on ch 1?

Does anyone with older DKVs have this clunking pedal issue, and have they found a way to solve it?

(Message over 64 KB, truncated)