Disklavier

if you care about quality of sound i would not use bluetooth speakers. 
wires are very reliable, bluetooth often is not. we have a wide range of 
bluetooth speakers and the best of them (sound quality is very good for 
smallish speakers) works most of the time but screws up often enough 
that i would not use it unless it is very close and there are no sources 
of interference.

some things work ok with bluetooth and it is much better than it used to 
be but it is still not equal to the simple wired connection.

Best regards, Spencer Chase
67550-Bell Springs Rd.
Garberville, CA 95542 Postal service only.
Laytonville, CA 95454 UPS only.
21220 92nd Place W., Edmonds, WA 98020
Spencer@...
Spencer@...
Spencer@...
http://www.spencerserolls.com
http://www.poodlex.com
(425) 791-0309
(707) 223-8212



------ Original Message ------
From: "mateo sell mateodavidsoell@yahoo.es [disklavier]" 
<disklavier@yahoogroups.com>
To: "disklavier yahoo group" <disklavier@yahoogroups.com>
Sent: 6/5/2016 7:59:43 PM
Subject: [disklavier] speakers for disklavier

>
>Hello!  We have quickly realized that having a pair of small speakers 
>(just to use in our home, not performance or large setting) would be 
>very helpful.  I could not find specific information in the manuals nor 
>the internet.
>
>~ Our MarkIIXG unit only has host & midi in/out connections in the back 
>of the box, so I assume we’d have to pass a speaker cables into a 
>headphone jack of the silent unit … Correct?
>
>
>~ In order to not have cables dangling off the headphone jacks of the 
>silent unit and around to the speakers, I assume we could use a 
>bluetooth transmitter plugged into the headphone jacks that would send 
>signal to AC powered speakers?
>
>~ What type of speakers would we need to keep pace with the 
>possibilities of the disklavier?  I am completely clueless … 
>mono/stereo, monitor, etc.
>
>~ Are there a pair of small low profile speakers that most people use 
>in their homes for their disklavier that don’t have built in speakers?
>
>Thank your for your help and any suggestions!,
>
>Matt
>
>
>