Disklavier

Hi

I am sorry I don't know your DKV but you can not format a 1.4M floppy 
as a 720K and then expect a PC to read it.  The other hole tells the 
PC that it is 1.4M but if you format it to 720K it will not see it. 
You could tape over the hole, but I don't like doing that as the tape 
may come off inside the drive.

It is ALWAYS worth keeping an old PC with Win95/98 on it just for 
these occasions.  I keep an old laptop handy for this.


Midi Magic



--- In disklavier@yahoogroups.com, "terryl212" <terryl212@h...> wrote:
> 
> Thanks for the help from both of you.  I was able to download and 
> play files from this site thanks to your guidance.  
> 
> One odd item.  I could only create usable diskettes from new 
> preformatted diskettes, i.e. came that way from manufacturer.  
> Diskettes formatted in the DKC100R were not readable by the PC even 
> with the EEXPLORE.EXE program provided in the dkvutils.zip file.  I 
> tried reformatting DKC100R formatted diskettes, however Windows XP 
> Pro only allows me to format 1.44 MB diskettes, even though I 
> inserted the old DD diskette.  The net result is that once I've 
> formatted the diskette with the Disklavier, it is no longer 
readable 
> by the PC.  
> 
> If anyone knows the number of tracks, sectors and bytes per cluster 
> I might be able to re-format a 720kb floppy using the old DOS 
format 
> command.
> 
> Maybe I need an older version of Windows
> 
> Any ideas?
> 
> Thanks for the help.
> 
> 
> 
> --- In disklavier@yahoogroups.com, PianoBench@a... wrote:
> > Good evening, everyone.
> > 
> > Robert's reply needs additional explanation, I think.
> > 
> > Yamaha's published disks are definitely different from the normal 
> PC format. 
> > I am not 100% certain of the technical distinction, but I believe 
> that they 
> > are missing a boot sector. That means that you cannot read Yamaha-
> published 
> > disks on a computer unless you have special software for this 
> purpose, such as the 
> > Geibler Utility. In no case are these disks readable on a 
> Macintosh.
> > 
> > I don't know whether there is any technical distinction between a 
> disk that 
> > is formatted in the Disklavier vs. a pre-formatted PC disk vs. a 
> disk formatted 
> > on a Windows computer (or on a Mac using the PC format). 
> Regardless, all of 
> > these disks ARE readable by the Disklavier.
> > 
> > A DC6 with a DKC100R control unit is a Mark II series Disklavier. 
> I can only 
> > read the double-density (DD) disk format.
> > 
> > Assuming that you format DD disks in your Disklavier, purchase 
pre-
> formatted 
> > DD disks, or properly format them in a PC, you are fine. You can 
> easily go 
> > back and forth between computer and PC. If, however, you 
> incorrectly format a DD 
> > disk as an HD disk on a PC or you format an HD disk on the 
> Disklavier (which 
> > results in a DD format), then things don't work out right.
> > 
> > The last thing to know is this: although you can transfer files 
> back and 
> > forth between computer and Disklavier, the files that you record 
> on the Disklavier 
> > will be in E-SEQ format. Since there are few if any E-SEQ 
playback 
> or editing 
> > programs for PC, there is not much that you can do with these 
> files on the PC 
> > unless you convert them using the Geibler utilities.
> > 
> > On the other hand, if you record directly into your computer and 
> save the 
> > resulting files as Standard MIDI File (SMF) Type 0 or if you 
> acquire SMFs of Type 
> > 0 from other sources, you can copy them to a DD disk for playback 
> in your 
> > Disklavier--assuming that your Disklavier has the firmware update 
> that provides 
> > limited support for SMF Type 0. NOTE: Avoid putting both E-SEQ 
and 
> SMFs on the 
> > same disk with this Disklavier.
> > 
> > IMHO, your life will be much easier if you add a Yamaha DSR1 to 
> your 
> > Disklavier, thus providing it with full SMF support, HD support, 
> and an internal tone 
> > generator.
> > 
> > Regards,
> > PianoBench
> > 
> > In a message dated 11/8/04 5:55:10 PM, rwelcyng@a... writes:
> > 
> > 
> > > 
> > > The Disklavier's diskette format is different from a PC's.  To 
a 
> PC, a
> > > Disklavier-formatted diskette appears to be in need of 
> formatting.
> > > Don't do it of course!
> > > 
> > > I use and recommend the Geibler Utility (www.giebler.com) 
Yamaha 
> Disk
> > > Manager (which runs under DOS).  Other folks use the DKVUtils 
> available
> > > for downloading on this site.
> > > 
> > > terryl212 wrote:
> > > >
> > > > I have a DC6 with a DKC100R.  The DKC100R diskette format 
> appears to
> > > > be different from my PC's diskette format.  Does anyone know 
> if it's
> > > > possible to transfer files to & from the PC to the DKC100R via
> > > > diskette.  If not, can it be done some other way (e.g. cable)?
> > > >
> > > > Any help is appreciated.
> > > >
> > > > Thanks, Terry
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > >
> > > > To Post a message to the group, send it to:   disklavier@Y...
> > > >
> > > > To Post a private message to Todd Muncy, the group's founder 
> and 
> > > moderator, send it to:
> > > > disklavier-owner@Y...
> > > >
> > > > To reach our group's web site go to:
> > > > http://Yahoogroups.com/group/disklavier
> > > >
> > > > Todd's family web site was completely updated 012/22/03.  It 
> contains some 
> > > fun disklavier content and links to midi sites among many other 
> things, The 
> > > url is:
> > > > http://MuncyFamily.com
> > > >
> > > > THINKING OF LEAVING THE GROUP?
> > > > If you are thinking of unsubcribing because you are getting 
> too much mail, 
> > > go the the web site and change your email delivery option 
> instead.  That 
> > > will fix the problem, while maintaining your access to the 
> group.  If you insist 
> > > on leaving us completely send a blank email to:
> > > > disklavier-unsubscribe@y...
> > > >
> > > > Know someone who wants to join?  Have them send a blank email 
> to:
> > > > disklavier-subscribe@e... or give them this link:
> > > > http://Yahoogroups.com/group/disklavier/join
> > > > 
> > > > Yahoo! Groups Links
> > > >
> > > >
> > > >
> > > > 
> > > >
> > > >
> > > >
> > > >
> > > >
> > > 
> > > 
> > > --
> > > Robert Welcyng
> > > Anchorage, Alaska
> > > 
> > > 
> > > 
> > > 
> > > 
> > > To Post a message to the group, send it to:   disklavier@Y...
> > > 
> > > To Post a private message to Todd Muncy, the group's founder 
and 
> moderator, 
> > > send it to:
> > > disklavier-owner@Y...
> > > 
> > > To reach our group's web site go to:
> > > http://Yahoogroups.com/group/disklavier
> > > 
> > > Todd's family web site was completely updated 012/22/03.  It 
> contains some 
> > > fun disklavier content and links to midi sites among many other 
> things, The 
> > > url is:
> > > http://MuncyFamily.com
> > > 
> > > THINKING OF LEAVING THE GROUP?
> > > If you are thinking of unsubcribing because you are getting too 
> much mail, 
> > > go the the web site and change your email delivery option 
> instead.  That will 
> > > fix the problem, while maintaining your access to the group.  
If 
> you insist 
> > > on leaving us completely send a blank email to:
> > > disklavier-unsubscribe@y...
> > > 
> > > Know someone who wants to join?  Have them send a blank email 
to:
> > > disklavier-subscribe@e... or give them this link:
> > > http://Yahoogroups.com/group/disklavier/join
> > > 
> > > Yahoo! Groups Links
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > > 
> > >