Yahoo Groups archive

Disklavier

Index last updated: 2026-04-28 23:20 UTC

Message

Re: [disklavier] Power Supply for DC3M4t

2005-07-02 by Mark

The Disklavier does not use a lot of power when it is idle. I would 
check the documentation of the particular Disklavier for the power 
requirements of the control unit. I just checked my manuals and power 
requirements are not listed. Something I find important in selecting a 
UPS  is the Equipment Protection Guarantee. My APC ups has a Lifetime 
Connected Equipment Protection provision that covers up to $25,000. I 
just looked on my XG Mark II and it say 120 watts. The speaker power 
supply is 22 watts. The 350 va UPS is equivalent to 225 watts. I 
submitted a question to APC at APCC.COM Maybe they will reply to the group.

Mark in Idaho

Bob Colopy wrote:

> Do different versions of the Disklavier e.g. Mark III versus Mark IV 
> or C2
> versus C3 have different power requirements? If you are sure that 
> 350va is
> adequate for DC3M4t  then I'll get it and leave the piano on. This will
> probably solve the problem since when turned on correctly it doesn't 
> do the
> random note thing so as long as it stays on it should be fine. I'll 
> test it
> after the holidays.
>
> Bob
>
> At 11:15 PM 7/1/2005, you wrote:
> >As a computer geek, I have had UPS systems on my computers for years.
> >The Disklavier controller and mechanism is just like a computer and
> >deserves the same protection. APC makes a UPS that is adequate for a
> >Disklavier that one can buy for about $40.00 at CompUSA or Office Depot.
> >A size of 350va or greater should do fine. I plugged my Disklavier into
> >a UPS the day I got it. In big cities, a bigger issue is brown-outs,
> >especially during a hot summer or while an Air Conditioner is turning
> >on. A UPS will take care of all these power problems. A premium grade
> >UPS also "conditions" or "cleans up" the electric supply. Some of you
> >may want to ask the CompUSA tech about the different features a UPS may
> >have.
> >
> >Mark in Idaho
>
>
>
> To Post a message to the group, send it to:   disklavier@...
>
> To Post a private message to Todd Muncy, the group's founder and 
> moderator, send it to:
> disklavier-owner@...
>
> To reach our group's web site go to:
> http://Yahoogroups.com/group/disklavier
>
> Todd's family web site was completely updated 012/22/03.  It contains 
> some fun disklavier content and links to midi sites among many other 
> things, The url is:
> http://MuncyFamily.com
>
> THINKING OF LEAVING THE GROUP?
> If you are thinking of unsubcribing because you are getting too much 
> mail, go the the web site and change your email delivery option 
> instead.  That will fix the problem, while maintaining your access to 
> the group.  If you insist on leaving us completely send a blank email to:
> disklavier-unsubscribe@...
>
> Know someone who wants to join?  Have them send a blank email to:
> disklavier-subscribe@... or give them this link:
> http://Yahoogroups.com/group/disklavier/join
>
>
>
> ------------------------------------------------------------------------
> YAHOO! GROUPS LINKS
>
>     *  Visit your group "disklavier
>       <http://groups.yahoo.com/group/disklavier>" on the web.
>        
>     *  To unsubscribe from this group, send an email to:
>        disklavier-unsubscribe@yahoogroups.com
>       <mailto:disklavier-unsubscribe@yahoogroups.com?subject=Unsubscribe>
>        
>     *  Your use of Yahoo! Groups is subject to the Yahoo! Terms of
>       Service <http://docs.yahoo.com/info/terms/>.
>
>
> ------------------------------------------------------------------------
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.