Disklavier

I could be something fell between the keys.  Are those two keys next to each
other?  It could also be a piano action problem.  Is this a MarkIII model?
I doubt the sensors need to be replaced.  First, look for a foreign object,
then check the action regulation.  Then the key sensors can br adjusted in
maintenance mode, and that may require a technician.

Carol Beigel

----- Original Message ----- 
From: "Phil Becker" <phil@...>
To: <disklavier@yahoogroups.com>
Sent: Wednesday, September 23, 2009 12:07 PM
Subject: [disklavier] DC3 Pro Key Sensor Question


>I have a millennium edition DC3 Pro that has developed an issue with the
>key
> sensor on a couple of keys on the high end of the keyboard.  The sensors
> aren't completely out, but rather seem to have only a couple of levels of
> resolution, so sometimes the keys don't send the midi output when struck,
> and sometimes they do.  Even when they do, however, the output is very
> "coarse" for those two keys. In all other respects the piano is operating
> 100% correctly.
>
> My question is: Is this likely to be a bad sensor that will need to be
> replaced, or is it possible that it is a dirty sensor that could somehow
> be
> cleaned and not need replacing.  Before taking things apart and trying to
> clean the keys at that level, I thought I'd find out if it is a losing
> mission and I just need to call a technician and prepare to buy new
> sensors.
>
> Phil
>
>
>
> ------------------------------------
>
> To Post a message to the group, send it to:   disklavier@...
>
> To Post a private message to Todd Muncy, the group's founder and
> moderator, send it to:
> disklavier-owner@...
>
> To reach our group's web site go to:
> http://Yahoogroups.com/group/disklavier
>
> THINKING OF LEAVING THE GROUP?
> If you are thinking of unsubcribing because you are getting too much mail,
> go the the web site and change your email delivery option instead.  That
> will fix the problem, while maintaining your access to the group.  If you
> insist on leaving us completely send a blank email to:
> disklavier-unsubscribe@...
>
> Know someone who wants to join?  Have them send a blank email to:
> disklavier-subscribe@... or give them this link:
> http://Yahoogroups.com/group/disklavier/join
> Yahoo! Groups Links
>
>
>
>
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.138 / Virus Database: 270.13.110/2385 - Release Date:
> 9/20/2009 5:51 PM
>
>
>