Disklavier

I have never run RemoteLive successfully.  I was never made it past the "Sync Setting" on page 7 of the RemoteLive installation PDF since that requires access to the Setup menu.  Clicking "Setup" crashes the app after delivering the incompatibility message and takes me to the I/F Updater screen.

I have no Internet access anymore.  When I click "Internet" I get a big red X and Error Code 2001, telling me to restart everything.  
BTW I can play stuff from the local DKV library no problem. 

Before I did the updates I had net access and DKV Radio no problem. 

Thanks,
John

--- In disklavier@yahoogroups.com, Bill Brandom  wrote:
>
> Don't worry about the remote. Is your piano playing when you see the
> keyboard being played on the screen between acts?
> 
> Bill
> 
> On Fri, Jan 25, 2013 at 8:29 PM, John  wrote:
> 
> > **
> >
> >
> > Hello,
> >
> > I have a C2MarkIV and was hoping to participate in the Elton John event.
> > Signed up online and got the remote live USB key good to go. One last step:
> > make sure the software is up to date.
> >
> > At first the PRC-100 Updater said I was current at 4.0.0. But the DKV
> > needed an update, so I connected and it installed v4.02build 1 (20120906).
> > After doing that and restarting, the PRC Updater reported that there was a
> > v4.01. So I updated that, too.
> >
> > Starting both the DKV and PRC from scratch, the PRC connects to the DKV
> > okay but when the interface s/w starts it tells me the "PRC software is not
> > compatible with the piano", and tells me to run the I/F Updater. But I'm
> > already on PRC 4.01 so that ain't right.
> >
> > I got a single call into Yamaha support before closing time and that
> > yielded the suggestion that I hard-reset the PRC back to the 3.0 system
> > loaded from an SD card. That worked fine, and I could connect to the DKV,
> > but get the same incompatibility error when I run the interface, both at
> > v3.0 and when it "successfully" updates to 4.01.
> >
> > I was thinking I should also try to downgrade the DKV to the 400update.iso
> > but I don't have my original CD and boot floppy from when I installed 4.0 a
> > couple of years ago. I can burn a new CD but cannot make a boot floppy
> > since the PRC Setup menu is inaccessible.
> >
> > Any suggestions? Elton John starts in an hour!
> >
> > Thanks in advance,
> > John
> >
> >  
> >
>