Disklavier

Are the artists prior to Elton supposed to be playing through the Disklavier?  So far no acoustic piano playback.  My remote live is working as I can play any of the on demand performances.

Edward

Sent from my iPad

On Jan 25, 2013, at 8:48 PM, "John" <john@...> wrote:

> I have never run RemoteLive successfully. I was never made it past the "Sync Setting" on page 7 of the RemoteLive installation PDF since that requires access to the Setup menu. Clicking "Setup" crashes the app after delivering the incompatibility message and takes me to the I/F Updater screen.
> 
> I have no Internet access anymore. When I click "Internet" I get a big red X and Error Code 2001, telling me to restart everything. 
> BTW I can play stuff from the local DKV library no problem. 
> 
> Before I did the updates I had net access and DKV Radio no problem. 
> 
> Thanks,
> John
> 
> --- In disklavier@yahoogroups.com, Bill Brandom wrote:
> >
> > Don't worry about the remote. Is your piano playing when you see the
> > keyboard being played on the screen between acts?
> > 
> > Bill
> > 
> > On Fri, Jan 25, 2013 at 8:29 PM, John wrote:
> > 
> > > **
> > >
> > >
> > > Hello,
> > >
> > > I have a C2MarkIV and was hoping to participate in the Elton John event.
> > > Signed up online and got the remote live USB key good to go. One last step:
> > > make sure the software is up to date.
> > >
> > > At first the PRC-100 Updater said I was current at 4.0.0. But the DKV
> > > needed an update, so I connected and it installed v4.02build 1 (20120906).
> > > After doing that and restarting, the PRC Updater reported that there was a
> > > v4.01. So I updated that, too.
> > >
> > > Starting both the DKV and PRC from scratch, the PRC connects to the DKV
> > > okay but when the interface s/w starts it tells me the "PRC software is not
> > > compatible with the piano", and tells me to run the I/F Updater. But I'm
> > > already on PRC 4.01 so that ain't right.
> > >
> > > I got a single call into Yamaha support before closing time and that
> > > yielded the suggestion that I hard-reset the PRC back to the 3.0 system
> > > loaded from an SD card. That worked fine, and I could connect to the DKV,
> > > but get the same incompatibility error when I run the interface, both at
> > > v3.0 and when it "successfully" updates to 4.01.
> > >
> > > I was thinking I should also try to downgrade the DKV to the 400update.iso
> > > but I don't have my original CD and boot floppy from when I installed 4.0 a
> > > couple of years ago. I can burn a new CD but cannot make a boot floppy
> > > since the PRC Setup menu is inaccessible.
> > >
> > > Any suggestions? Elton John starts in an hour!
> > >
> > > Thanks in advance,
> > > John
> > >
> > > 
> > >
> >
> 
>