Yahoo Groups archive

Disklavier

Index last updated: 2026-04-28 23:20 UTC

Thread

Converted files don't use sustain pedal

Converted files don't use sustain pedal

2011-01-22 by masterpatel

So I converted a midi file to the ESEQ format and was able to play it on my DKV.  But I noticed the converted files don't use the sustain pedal so it doesn't sound quite right.  Is that the case with all converted midis?

Re: [disklavier] Converted files don't use sustain pedal

2011-01-25 by Spencer chase

Some DKVs want the pedal data on channel 3, I think. Before you convert the files, make sure the pedal is on channel 3.
my Midimod2 program will move the pedal data to channel 3 if you select that option when you process the files. You can find it on the following page of my web site: http://www.spencerserolls.com/Files4Download.html



On 1/21/2011 7:50 PM, masterpatel wrote:
Show quoted textHide quoted text

So I converted a midi file to the ESEQ format and was able to play it on my DKV. But I noticed the converted files don't use the sustain pedal so it doesn't sound quite right. Is that the case with all converted midis?


-- 
Best regards, Spencer Chase
67550-Bell Springs Rd.
Garberville, CA 95542 Postal service only.
Laytonville, CA 95454 UPS only.
Spencer@...
http://www.spencerserolls.com
(707) 984-8356 
(425) 791-0309

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.