Dotcomformat

most doepfer modules also run with 15v. i asked dieter
doepfer about that by email. there are some modules
(like the A-155, A151, A-126, A-127, A-129/2, A-130,
A-131, A-134 and A-135.) who get some damage if you
run them with 15v. you will find all your questions
answered on doepfer.de (if you can read german -
because the faq about the power supply is only in
german).

at the moment i try to adapt a doepfer quantizer. a
single space dotcom blank panel gives the new housing.

oliver


> --- dragonflymodular <stevenoconnor@freeuk.com>
> wrote:
> 
> > 
> > I've finally started along the .com/Oakley road -
> > and I'm so impressed by the sound 
> > and feel of the modules that I've decided to sell
> > most of my doepfer/as gear.
> > 
> > The best bits remain and I'd like to make them all
> > .com/motm format.
> > I can do the drilling/screen printing myself and
> for
> > now a cheap conversion will use 
> > 1/4" sockets but retain the small knobs, but I'm
> not
> > too hot on power issues.
> > 
> > Is it a simple job to make them run off a
> .com/motm
> > 15v supply? I can make the 
> > custom cable from module to supply but how do I
> > knock it down from 15v to 12v or 
> > will they run ok on 15v?
> > 
> > I'll probably have a few 12v modules so maybe a
> > custom board that accepts a snipped 
> > .com 15v feed and has a few ASys and doepfer
> sockets
> > would be perfect...Anyone 
> > done this? I have an old 12v supply that can be
> > adapted for this purpose.
> > 
> > I think this would be a great little thing for
> > someone to sell...
> > 
> > Steven
> > 
> > 
> > 
> > 
> > 
> 
> 
> 
> 		
> __________________________________ 
> Do you Yahoo!? 
> Read only the mail you want - Yahoo! Mail SpamGuard.
> 
> http://promotions.yahoo.com/new_mail 
>  


	

	
		
___________________________________________________________ 
Gesendet von Yahoo! Mail - Jetzt mit 250MB Speicher kostenlos - Hier anmelden: http://mail.yahoo.de