ARP specified the 2N5249 as an alternate for the TZ81. They likewise specified 2N5367 as an alternate for the TZ581 2N3904 would be a modern sub for the TZ81, and 2N3906 for the TZ581. I have some ARP stuff on my website (http://www.guitarfool.com/ARP2500.html), including the original 1006 which was slightly diferent from the 4012 & 4035. ARP had other filters, like the 4023 and the 4072 & 4075, which sound a bit diferent from the ladder. Jeff ----- Original Message ----- From: "Larry T." <larry@unicode.com> To: <dotcomformat@yahoogroups.com> Sent: Thursday, December 15, 2005 6:50 PM Subject: [dotcomformat] Re: ARP Filter vs. Dotcom Filter > --- In dotcomformat@yahoogroups.com, "Dana Countryman" <dana@d...> wrote: > <snip> >> Has anyone here tried to build the ARP filter?: >> http://www.arptech.synth.net/pdf/4012.pdf >> >> I guess my questions are: >> >> 1) Has anyone done a side by side comparison of the Arp filter vs. >> the Dotcom Filter...? >> >> 2) Would it worthwhile to have this filter? >> >> and >> >> 3) Can one still get the semiconductors needed for this circuit? >> >> I'm always looking for a new sound that I can't get currently... >> >> - Dana >> > > Dana, I can't address #1 or #2. However, I did some searching for the > TZ-81 transistors and the AD3958 dual FET. No such beasts available. > In fact, I can't even find data sheets for them! It is entirely > possible that the 'TZ-81' is an internal ARP designation for some > otherwise standard transistor, but since I'm not an ARP tech, I don't > know. I suspect that buiding this particular filter would prove VERY > difficult. Given the number of filters currently available from other > sources, I'd stick to getting current releases and re-formatting them > (like you are doing with the Blacet). > > I'm curious if anyone has tried any of the Club-Of-The-Knobs filters > to see how they compare to the DotCom/Moog? What about re-formatting > of Doepfer/Analogue Solutions/... EuroRack modules? > > Larry T. > > > > > > > > > > Yahoo! Groups Links > > > > > >
Message
Re: [dotcomformat] Re: ARP Filter vs. Dotcom Filter
2005-12-16 by jeff brown
Attachments
- No local attachments were found for this message.