Yahoo Groups archive

Dotcomformat

Index last updated: 2026-04-28 23:20 UTC

Message

Re: To 3rd party or not to 3rd party

2007-03-13 by Bernie

Paul,

I've looked at the COTK website. They have quite a variety of modules,
but until the USD starts doing better against the Euro, I'll have to
pass.

Bernie


--- In dotcomformat@yahoogroups.com, Paul Schmidt <paul_schmidt@...>
wrote:
>
> > I love Club Of The Knobs, I recomend them they sound
> > and look awsome.
> > Â
> > paul
> >
> >
> dotcomformat@yahoogroups.com wrote: > > >
>
> > In a few weeks, my two 22U cabinets will contain the
> > following
> > modules, leaving 5 spaces:
> >
> > 1 Q137 Power Control (rear)
> > 1 Q103 DC Power Interface (rear)
> > 1 Q142 Pedal Interface (rear)
> >
> > 1 Q104 Midi Interface
> > 1 Q105 Slew Limiter
> > 5 Q106 Oscillator+CRS
> > 1 Zeroscillator
> > 1 Q141 Oscillator Aid
> > 1 Q161 Oscillator Mixer
> > 1 Q107 State Variable Filter
> > 1 Q150 Transistor Ladder Filter
> > 4 Q109 Envelope Generator
> > 2 Q108 Amplifier
> > 1 Q110 Noise Source
> > 1 Q111 Pan/Fade
> > 2 Q112 4-Channel Mixer
> > 1 Q116 Ring Modulator
> > 1 Q117 Sample/Hold
> > 1 Q118 Instrument Interface
> > 1 Q123 Standards
> > 2 Q124 Multiples
> > 1 Q125 Signal Processor
> > 1 Q130 Clipper/Rectifier
> >
> > I had originally planned to fill the 5 spaces with
> > the following
> > modules, but have been wondering if I should go for
> > some non-Dot Com
> > modules instead. Are any of these modules must-haves
> > in a 44 space
> > system? I don't plan on using it in stereo or surround
> > unless it
> > grows at least one more 22U cabinet. Any suggestions
> > /
> > recommendations for or against 3rd party modules
> > would be
> > appreciated.
> >
> > 2 Q108 Amplifier (Is there an advantage to having
> > 3 or 4 instead of
> > only two?)
> > 1 Q115 Reverb (I have an Alesis MicroVerb and a Premier
> > 90, but
> > they can only be used on the output)
> >
> >
> >
> > Bernie
>

Attachments

Move to quarantaine

This moves the raw source file on disk only. The archive index is not changed automatically, so you still need to run a manual refresh afterward.