Howdy,
Usually after the 1st party, I am a bit tired. After the second
party, I am just plain tired. So I don't know about the 3rd party. By
then I think it's time for bed.
I have other modules in my system. a dark star chaos,(building 2
more), that I mounted in a MoTM panel. UGLY! I have a doepfer dual
quantizer that I am going to mount in a .com panel when I get the
nippers. The dark Star too. I leave the small jacks in the module and
parallel to 1/4" in the surplus space at the bottom. This allows me
to interface with the paia 9700, and if someone comes over with 1/8"
format, it helps, combined with my 1/4"-1/8" panel. Not that it's
happened yet but you never know.
Rig
--- In dotcomformat@yahoogroups.com, Oliver Abplanalp
<oabplanalp@...> wrote:
>
> yes they are not so cheap - usd doing better against
> the euro... i think you have to wait a longer period.
>
> oliver
>
>
> --- Bernie <kornowicz@...> schrieb:
>
> >
> > Paul,
> >
> > I've looked at the COTK website. They have quite a
> > variety of modules,
> > but until the USD starts doing better against the
> > Euro, I'll have to
> > pass.
> >
> > Bernie
> >
> >
> > --- In dotcomformat@yahoogroups.com, Paul Schmidt
> > <paul_schmidt@>
> > wrote:
> > >
> > > > I love Club Of The Knobs, I recomend them they
> > sound
> > > > and look awsome.
> > > > Â
> > > > paul
> > > >
> > > >
> > > dotcomformat@yahoogroups.com wrote: > > >
> > >
> > > > In a few weeks, my two 22U cabinets will contain
> > the
> > > > following
> > > > modules, leaving 5 spaces:
> > > >
> > > > 1 Q137 Power Control (rear)
> > > > 1 Q103 DC Power Interface (rear)
> > > > 1 Q142 Pedal Interface (rear)
> > > >
> > > > 1 Q104 Midi Interface
> > > > 1 Q105 Slew Limiter
> > > > 5 Q106 Oscillator+CRS
> > > > 1 Zeroscillator
> > > > 1 Q141 Oscillator Aid
> > > > 1 Q161 Oscillator Mixer
> > > > 1 Q107 State Variable Filter
> > > > 1 Q150 Transistor Ladder Filter
> > > > 4 Q109 Envelope Generator
> > > > 2 Q108 Amplifier
> > > > 1 Q110 Noise Source
> > > > 1 Q111 Pan/Fade
> > > > 2 Q112 4-Channel Mixer
> > > > 1 Q116 Ring Modulator
> > > > 1 Q117 Sample/Hold
> > > > 1 Q118 Instrument Interface
> > > > 1 Q123 Standards
> > > > 2 Q124 Multiples
> > > > 1 Q125 Signal Processor
> > > > 1 Q130 Clipper/Rectifier
> > > >
> > > > I had originally planned to fill the 5 spaces
> > with
> > > > the following
> > > > modules, but have been wondering if I should go
> > for
> > > > some non-Dot Com
> > > > modules instead. Are any of these modules
> > must-haves
> > > > in a 44 space
> > > > system? I don't plan on using it in stereo or
> > surround
> > > > unless it
> > > > grows at least one more 22U cabinet. Any
> > suggestions
> > > > /
> > > > recommendations for or against 3rd party modules
> > > > would be
> > > > appreciated.
> > > >
> > > > 2 Q108 Amplifier (Is there an advantage to
> > having
> > > > 3 or 4 instead of
> > > > only two?)
> > > > 1 Q115 Reverb (I have an Alesis MicroVerb and a
> > Premier
> > > > 90, but
> > > > they can only be used on the output)
> > > >
> > > >
> > > >
> > > > Bernie
> > >
> >
> >
> >
> >
>
>
>
>
> ___________________________________________________________
> Telefonate ohne weitere Kosten vom PC zum PC:
http://messenger.yahoo.de
>