Synth-DIY Yahoo! Groups Archives

Space Echo idea

2010-07-07 by David Griffith

While fantasizing about the Roland Space Echo, I fired off a post to 
ModularSynthPanels@yahoogroups.com about shoehorning a Boss RE-20 Space 
Echo into a module.  One problem with this is that the RE-20 uses a DSP of 
some sort.  Can someone think of a solid-state way to capture several 
seconds of audio signal so as to emulate the tape loop in the Roland 
RE-201?  The other half of emulating the Space Echo appears to be already 
done in the form of the Q115 reverb module.

-- 
David Griffith
dgriffi@cs.csubak.edu

Re: Space Echo idea

2010-08-26 by rrsw_ccs

The instant the warranty expires, I'm mounting my Strymon El Capistan into a panel. (Thay are considering doing it as a company, but most likely in Euro.)
If you can get your hands on one, they are the shizzizzle!

--- In dotcomformat@yahoogroups.com, David Griffith <dgriffi@...> wrote:

Show quoted textHide quoted text

>
> 
> While fantasizing about the Roland Space Echo, I fired off a post to 
> ModularSynthPanels@yahoogroups.com about shoehorning a Boss RE-20 Space 
> Echo into a module.  One problem with this is that the RE-20 uses a DSP of 
> some sort.  Can someone think of a solid-state way to capture several 
> seconds of audio signal so as to emulate the tape loop in the Roland 
> RE-201?  The other half of emulating the Space Echo appears to be already 
> done in the form of the Q115 reverb module.
> 
> -- 
> David Griffith
> dgriffi@...
>

RE: [dotcomformat] Re: Space Echo idea

2010-08-27 by John L Rice

Damn straight! :-) Looks like it will fit nicely in a 2U MU panel. (it may
be too wide to fit on a 2U MOTM panel) BrideChamber has these for the
adventurous DIYer that want to try to add voltge control:
http://www.bridechamber.com/bridechamber.com/VC_Res_PCB.html


I've got an El Capistan but only have one demo up so far. Not much of a demo
either, just one static setting I run a sequence through. Here it is for
what it's worth:
http://www.youtube.com/watch?v=ZLof9yclxT4

John L Rice

Show quoted textHide quoted text

> -----Original Message-----
> From: dotcomformat@yahoogroups.com
> [mailto:dotcomformat@yahoogroups.com] On Behalf Of rrsw_ccs
> Sent: Thursday, August 26, 2010 5:44 PM
> To: dotcomformat@yahoogroups.com
> Subject: [dotcomformat] Re: Space Echo idea
> 
> The instant the warranty expires, I'm mounting my Strymon El Capistan
> into a panel. (Thay are considering doing it as a company, but most
> likely in Euro.)
> If you can get your hands on one, they are the shizzizzle!
> 
> --- In dotcomformat@yahoogroups.com, David Griffith <dgriffi@...>
> wrote:
> >
> >
> > While fantasizing about the Roland Space Echo, I fired off a post to
> > ModularSynthPanels@yahoogroups.com about shoehorning a Boss RE-20
> Space
> > Echo into a module.  One problem with this is that the RE-20 uses a
> DSP of
> > some sort.  Can someone think of a solid-state way to capture several
> > seconds of audio signal so as to emulate the tape loop in the Roland
> > RE-201?  The other half of emulating the Space Echo appears to be
> already
> > done in the form of the Q115 reverb module.
> >
> > --
> > David Griffith
> > dgriffi@...
> >
> 
> 
> 
> 
> ------------------------------------
> 
> Yahoo! Groups Links
> 
> 
>

Dotcomformat

Space Echo idea

Space Echo idea

Re: Space Echo idea

RE: [dotcomformat] Re: Space Echo idea

Move to quarantaine