Elektron Musical Instruments

> All basic things, but I can't find any help within cubase or the mm manual
> as i think this is probably too basic.
> 

Which Audigy model do you have exactly?  I know the Audigy 2 ZS External 
Hub as FULL SIZE midi ports on it.  If you have the original Audigy 1 
card with the drive bay add-on, it uses mini midi jacks to save space. 
My card came with two short adapter cables that plug into these mini 4 
pin sockets and terminate to a normal midi socket that I can connect any 
regular midi cable into now.  If you don't have these, you should be 
able to purchase them from creative or online elsewhere.

Here's a link to cable I'm speaking of.
http://us.creative.com/products/product.asp?category=13&subcategory=55&product=252

You would need two of these, you would then be able to use the midi on 
the front with your normal midi cable connected to your MM.

Your card (I'm assuming is an Audigy 1) also comes with a joystick/midi 
connector on a bracket. I believe this would be your Audigy MIDI 1 in 
cubase, and the one on the breakout box would be MIDI 2.  Either should 
work okay with your MM.

If you have a motherboard joystick/MIDI port,  make sure you download 
the drivers from your motherboard manufacturers webpage to enable it.

I learned just about everything I know from reading Keyboard Magazine 
and Electronic Musician every month.  At first, most things and 
terminology was over my head, but with time, I picked things up and 
learned more and more.

Good luck,   come back with more questions if you're still having trouble