Elektron Musical Instruments

hey, thanks so much for writing back. i hacked into my
nord  patches and put in the midi global module and it
worked!!! whippee.

--- Silvia Tubig <rudebop@...> wrote:

> Hi...
> so to put it straight...the MD runs in sync to the
> echoplex and this works fine? So the echoplex sends
> a
> start command?
> means...you press a footswitch on the echoplex and
> the
> md starts..in sync...but the md not?
> or do you have to start the md by hand?
> you either are missing a start command for the nm or
> just havent patched it wright,,,usually i would
> think
> the MD would be better as clockmaster...
> 
> just try to get thwe MD and the NM hooked upo
> first...
> 
> enable clock and control output on the md in the
> global/sync menu and see if the NM gets in sync when
> connected to the M\ufffds midi out..
> 
> if not send me the patch you want to get runing in
> sync as an example and i will modifie it in the way
> that it runs in sync as an example...
> i ve an MD a nord modular and a G2 here... i can
> check
> if you done it wright...would be easier than
> distabnt
> trouble shooting..
> regards,
> Sven
> 
> --- margaret noble <margaretnoble2000@...>
> schrieb:
> 
> > hello all :-)!!!
> > 
> > i have been experimenting with midi sync but still
> > haven't successfully configured it. i wanted to
> > check
> > my facts with you since your last emails:
> > 
> > - no matter what midi channel you are on from a
> > device, all the channels will stay on the same
> > midi-clock. that is to say, that, if my echoplex
> is
> > the master clock, and it is transmitting midi data
> > on
> > midi channel 1. if my machine drum is set as its
> > slave
> > but receives midi data on midi channel 5 then it
> > will
> > still be on the echoplex's master clock even
> though
> > the data is transmitting into another midi
> channel?
> > 
> > - i am trying to get all my patterns to play in
> time
> > but not have the machine drum trigger notes on the
> > nord modular 1 that aren't in its original
> > programmed
> > sequence.
> > 
> > - does anyone know you have a special input
> > configured
> > on your nord modular patches to make sure they
> > receive
> > incoming midi clock signals? I am not sure i fully
> > understand the 'kbd" rec about NM1's from before.
> > 
> > i have been able to make my machine drum a slave
> to
> > my
> > echoplex. but, i haven't been successful using the
> > "midi thru" or otherwise on the machine drum to
> > trigger the clock on my NM1 even though i have the
> > nm1
> > midi clock set to external and i have the machine
> > drum
> > set to receive incominf sync messages.
> > 
> > i have been doing alot of trial and error but
> > haven't
> > been successful :-(
> > 
> > if you have any ideas, i would love your help,
> sorry
> > for pesky tech questions!!! thanks for your help
> :-)
> > 
> > 
> > 
> > __________________________________________________
> > Do You Yahoo!?
> > Tired of spam?  Yahoo! Mail has the best spam
> > protection around 
> > http://mail.yahoo.com 
> > 
> 
> 
> 
> 		
>
___________________________________________________________
> 
> Telefonate ohne weitere Kosten vom PC zum PC:
> http://messenger.yahoo.de
> 


__________________________________________________
Do You Yahoo!?
Tired of spam?  Yahoo! Mail has the best spam protection around 
http://mail.yahoo.com