Elektron Musical Instruments

Hi...
so to put it straight...the MD runs in sync to the
echoplex and this works fine? So the echoplex sends a
start command?
means...you press a footswitch on the echoplex and the
md starts..in sync...but the md not?
or do you have to start the md by hand?
you either are missing a start command for the nm or
just havent patched it wright,,,usually i would think
the MD would be better as clockmaster...

just try to get thwe MD and the NM hooked upo first...

enable clock and control output on the md in the
global/sync menu and see if the NM gets in sync when
connected to the M\ufffds midi out..

if not send me the patch you want to get runing in
sync as an example and i will modifie it in the way
that it runs in sync as an example...
i ve an MD a nord modular and a G2 here... i can check
if you done it wright...would be easier than distabnt
trouble shooting..
regards,
Sven

--- margaret noble <margaretnoble2000@...>
schrieb:

> hello all :-)!!!
> 
> i have been experimenting with midi sync but still
> haven't successfully configured it. i wanted to
> check
> my facts with you since your last emails:
> 
> - no matter what midi channel you are on from a
> device, all the channels will stay on the same
> midi-clock. that is to say, that, if my echoplex is
> the master clock, and it is transmitting midi data
> on
> midi channel 1. if my machine drum is set as its
> slave
> but receives midi data on midi channel 5 then it
> will
> still be on the echoplex's master clock even though
> the data is transmitting into another midi channel?
> 
> - i am trying to get all my patterns to play in time
> but not have the machine drum trigger notes on the
> nord modular 1 that aren't in its original
> programmed
> sequence.
> 
> - does anyone know you have a special input
> configured
> on your nord modular patches to make sure they
> receive
> incoming midi clock signals? I am not sure i fully
> understand the 'kbd" rec about NM1's from before.
> 
> i have been able to make my machine drum a slave to
> my
> echoplex. but, i haven't been successful using the
> "midi thru" or otherwise on the machine drum to
> trigger the clock on my NM1 even though i have the
> nm1
> midi clock set to external and i have the machine
> drum
> set to receive incominf sync messages.
> 
> i have been doing alot of trial and error but
> haven't
> been successful :-(
> 
> if you have any ideas, i would love your help, sorry
> for pesky tech questions!!! thanks for your help :-)
> 
> 
> 
> __________________________________________________
> Do You Yahoo!?
> Tired of spam?  Yahoo! Mail has the best spam
> protection around 
> http://mail.yahoo.com 
> 



		
___________________________________________________________ 
Telefonate ohne weitere Kosten vom PC zum PC: http://messenger.yahoo.de