have you tried to swap the left and right channel, to see if it's not your cable which is causing the difference? best regards, roel ----- Original Message ----- From: "gegge64" <vic20@...> To: <elektron-users@yahoogroups.com> Sent: Saturday, September 18, 2004 1:16 PM Subject: [elektron] Re: Stereo_issue with Machinedrum > > Hi, the outputs are routed to the Main Out's. I did a new measure, > and this time I measured the output levels on all the basdrums. > Here's the result: > > http://home.powertech.no/vhauge/Stereo_issue.htm > > In average, the right channel level of the Main Output is 0.36 dB > higer than left channel. > > What about the output levels on your MD....are they equal on both > channels ? > > > Thanks! > > Regards > Victor > > --- In elektron-users@yahoogroups.com, Federico Ciapi > <federico.ciapi@t...> wrote: > > Which output is the BD routed to? > > > > Il giorno 18/set/04, alle 00:54, gegge64 ha scritto: > > > > > When playing a mono source such as a bassdrum on my Machinedrum, > the > > > stereo field is not perfectly centered. I have to adjust the > panning > > > in the Routing section by -4 to get the stereo field centered. > > > > > > Se the following illustration: > > > > > > http://home.powertech.no/vhauge/Stereo_issue.htm > > > > > > > > > Anyone else who has this problem ? > > > > > > > > > Victor > > > > > > Yahoo! Groups Links > > > > > > > >
Message
Re: [elektron] Re: Stereo_issue with Machinedrum
2004-09-18 by roel
Attachments
- No local attachments were found for this message.